Changes

Created page with "This page contains information the different types of LEDs and their behaviour on a {{{name}}} device. __TOC__ {{#ifeq: {{{eth}}} | 1 | <h2>Ethernet port LEDs</h2> {{#ifeq:..."
This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.
__TOC__

{{#ifeq: {{{eth}}} | 1 | <h2>Ethernet port LEDs</h2>

{{#ifeq: {{{eth_leds}}} | 1 |
The <b>Ethernet port LEDs</b> are located on the device's front panel, under each respective Ethernet port.

[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png]]

<table class="nd-othertables_3">
<tr>
<th width=500>State</th>
<th width=500>Description</th>
</tr>
<tr>
<td>LED on</td>
<td>Operating as a 10/100 Mbps connection.</td>
</tr>
<tr>
<td>LED off</td>
<td>No link established.</td>
</tr>
<tr>
<td>LED blinking</td>
<td>Connection established and there is activity on this port (data being transferred).</td>
</tr><!--
<tr>
<td>LEDs turn on and off in sequence on after the other</td>
<td>The device is in the Bootloader menu state.</td>
</tr>-->
</table>
|There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.

[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png]]

They provide information on the current states of the Ethernet ports. Each port has two LEDs:

<ul>
<li><span style="color: orange;"><b>Orange</b></span> - 10/100 Mbps connection</li>
<li><span style="color: green;"><b>Green</b></span> - 1000 Mbps connection</li>
</ul>

Below is an explanation on the behaviours of green and orange LEDs.

<table class="nd-othertables_3">
<tr>
<th width=500>State</th>
<th width=500>Description</th>
</tr>
<tr>
<td>LED on</td>
<td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).</td>
</tr>
<tr>
<td>LED off</td>
<td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).</td>
</tr>
<tr>
<td>LED blinking</td>
<td>Connection established and data is being transferred over this port.</td>
</tr>
</table>
}}|}}

==Mobile signal strength indication LEDs==

The <b>mobile signal strength indication LEDs</b> are located near the SIM card slot.

[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_signal_strength_leds.png]]

The number of lit up LEDs represents a different mobile signal strength ([[RSSI]]) value in dBm.
{{#ifeq: {{{mobile_leds}}} | 3 |
<table class="nd-othertables_2">
<tr>
<th style="width: 500px>No. of lit up LEDs</th>
<th style="width: 500px>Signal strength value</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111 dBm </td>
</tr>
<tr>
<td>1</td>
<td>-110 dBm to -82 dBm</td>
</tr>
<tr>
<td>2</td>
<td>-81 dBm to -52 dBm</td>
</tr>
<tr>
<td>3</td>
<td>≥ -51 dBm</td>
</tr>
</table>
|<table class="nd-othertables_3">
<tr>
<th width=500>No. of lit up LEDS</th>
<th width=500>Signal strength</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111 dBm</td>
</tr>
<tr>
<td>1</td>
<td>-110 dBm to -97 dBm</td>
</tr>
<tr>
<td>2</td>
<td>-96 dBm to -82 dBm</td>
</tr>
<tr>
<td>3</td>
<td>-81 dBm -67 dBm</td>
</tr>
<tr>
<td>4</td>
<td>-66 dBm to -52 dBm</td>
</tr>
<tr>
<td>5</td>
<td>≥ -51 dBm</td>
</tr>
</table>
}}|}}

Navigation menu