Changes

50 bytes removed ,  10:14, 24 August 2021
Changed most of instruction
Line 9: Line 9:  
[[File:Network_interface_settings.png|200px|border|class=tlt-border]]
 
[[File:Network_interface_settings.png|200px|border|class=tlt-border]]
   −
* Disable WAN interface
+
* Disable WAN and WAN6 interfaces
[[File:Interfaces disable wan.png|border|class=tlt-border|1100px]]
+
[[File:WAN WAN6.png|left|1151x1151px|WAN and WAN6 interface]]
 +
 
 +
* Click '''Save & Apply'''
 +
 
 
----
 
----
 
* Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu.
 
* Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu.
 
[[File:Physical settings of interface lan.png|border|1100px|class=tlt-border]]
 
[[File:Physical settings of interface lan.png|border|1100px|class=tlt-border]]
 
----
 
----
* Select Ethernet Adapter item, by default it's '''eth1'''
+
* In interface tab, add both "'''eth0'''" and "'''eth1'''" interfaces
 
[[File:Ethernet adapter in lan interface.png|border|class=tlt-border]]
 
[[File:Ethernet adapter in lan interface.png|border|class=tlt-border]]
 
----
 
----
 
* It should result in something like this.
 
* It should result in something like this.
[[File:Eth1 appears in lan interface.png|border|class=tlt-border|1100px]]
+
[[File:Eth1 Eth0.png|alt=|border|1100x1100px]]
----
+
* Once you're done with configurations above just '''save any changes you made'''.
* Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 is disabled, and ID 2 is untagged.
+
* Wait a minute or two for the changes to take effect. If there is no effect, reboot the device.
[[File:Vlan settings for wan as lan.png|border|class=tlt-border|1100px]]
+
 
 
----
 
----
 
At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router.
 
At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router.

Navigation menu