Changes

Replaced content with "===<b>RUT2_R_00.07.01.2</b> | 2022.01.04=== * <b>New features</b> ** DFOTA modem upgrade system for Quectel modems * <b>Improvement..."
Line 21: Line 21:  
===='''RUT2_R_00.07.01''' | 2021.11.18====
 
===='''RUT2_R_00.07.01''' | 2021.11.18====
 
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
 
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
  −
===='''[[Media:RUT2XX R 00.01.14.5 WEBUI.bin|RUT2XX_R_00.01.14.5]]''' | 2021.12.09====
  −
  −
* New features:
  −
** DFOTA modem upgrade system for Quectel modems
  −
  −
* Fixes:
  −
** Fixed mobile MTU setting
  −
** Fixed incorrect QMI calls to modem
  −
** Increased buffer size for AT+CGDCONT output
  −
** Fixed persistence of DMZ firewall rules when loading Firewall General page
  −
  −
===='''[[Media:RUT2XX R 00.01.14.4 WEBUI.bin|RUT2XX_R_00.01.14.4]]''' | 2021.10.11====
  −
  −
* New features:
  −
** Added MeigLink SLM750-VAU support
  −
** Added ping to DNS feature for mobile
  −
  −
* Fixes:
  −
** Patched CVE-2021-33909 vulnerability
  −
** Patched CVE-2019-14834 vulnerability
  −
** Patched CVE-2021-37600 vulnerability
  −
** Fixed VoLTE configuration for EC25-V modules
  −
** Fixed seting band issues
  −
** Fixed RMS rscp, ecio, rsrp, sinr and rsrq values
  −
  −
===='''[[Media:RUT2XX R 00.01.14.3 WEBUI.bin|RUT2XX_R_00.01.14.3]]''' | 2021.08.17====
  −
  −
* New features:
  −
** Added MeigLink SLM750-VSA and SLM750-VJ support
  −
** Added MeigLink SLM750-VJ manual frequency band selection
  −
** Added MQTT Modbus Gateway keep alive option
  −
  −
* Improvements:
  −
** Added conntrack flush after IPsec connection
  −
  −
* Fixes:
  −
** Fixed hardware information config corruption when applying backup
  −
** Fixed backup archive validation
  −
** Fixed redirecting to correct IP address after firmware upgrade with keep settings
  −
** Fixed Modbus Master Alarms enabling
  −
  −
===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02====
  −
  −
* New features:
  −
** MeigLink SLM750 Australian module support
  −
  −
* Improvements:
  −
** Added CallFailed error handling
  −
** Updated APN database with OTA BELL ME operator APN
  −
** Added Client ID option to Data to Server
  −
** Added band selection support for Meiglink SLM750
  −
** Added band parsing to mobile library
  −
** OpenSSL updated to version 1.1.1k
  −
  −
* Fixes:
  −
** Fixed signal strength LED handling for Meiglink modems
  −
** Fixed backup generating without packages
  −
** Fixed service mode handling for Meiglink SLM750 modems
  −
** Fixed band handling when switching service modes
  −
** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
  −
** Fixed IPsec Passthrough function handling
  −
** Fixed Package Manager package install crash on reboot
  −
** Fixed modem FW version show for Meiglink SLM750
  −
** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
  −
** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
  −
** Fixed IPSec Pre-shared key option validation
  −
** Added security Wireless fixes for the FragAttacks vulnerabilities
  −
  −
===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
  −
  −
* New features:
  −
** PPPoE wired WAN
  −
** WiFi Multiple AP configuration page
  −
  −
* Improvements:
  −
** Added SHA1 HMAC hash support to dropbear (SSH server/client)
  −
** Updated libpcap to version 19.1
  −
** Updated sqlite3 to version 3.33
  −
** Updated curl to version 7.74
  −
** Updated ncurses to version 6.2
  −
** Updated pcre to version 8.44
  −
** Updated iptables to version 1.6.2
  −
** Added hard request, alarm and slave limits to MODBUS TCP Master
  −
** Added USB ZLP flag to avoid mobile network loss
  −
** Added new gsmctl command that returns operator names
  −
** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
  −
  −
* Fixes:
  −
** Fixed CVE-2019-9755
  −
** Fixed CVE-2018-16789
  −
** Fixed CVE-2020-12762
  −
** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
  −
** Fixed revision buffer size for Operator Control
  −
** Fixed operator selection logic
  −
** Fixed default PPTP route option handling
  −
** Fixed display of DDNS Hostname, Username and Password options when custom service is selected
  −
** Fixed incorrect VLAN ID range
  −
** Fixed IPsec start after reboot issue
  −
** Fixed IPsec cache issues
  −
** Fixed firewall rule execution when QoS is not enabled
  −
** Fixed ZeroTier crashing issues
  −
** Fixed Events Log Reporting sending email with attached file
  −
** Fixed unexpected Package Manager crash while installing unsupported packages
  −
** Fixed static mobile routes after modem restart
  −
** Fixed routing issue with mobile PPP connection type
  −
** Fixed double entries after firmware upgrade with keep settings on Output Scheduler
  −
** Fixed Hotspot freeze on launch with certain config bug
  −
** Fixed wireless device frequency and channel display in wireless widget
  −
** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration
  −
  −
===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26====
  −
  −
* Fixes:
  −
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
  −
** Fixed SSH reachable over SIM IP in early boot
  −
  −
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
  −
  −
* Fixes:
  −
** Added openvpn patch to fix CVE-2020-11810
  −
** Updated openssl to version 1.1.1i
  −
** Added dnsmasq patch for CVE-2019-14834
  −
** Added strongswan patch to fix CVE-2018-10811
  −
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
  −
** Updated uci to version 2019-09-01
  −
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
  −
** Fixed factory reset on button that wouldn't perform a complete settings wipe
  −
  −
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
  −
  −
* Fixes:
  −
** Randomized the global rate limiter to mitigate "SAD DNS" attack
  −
  −
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
  −
  −
* New features:
  −
** IPsec Xauth
  −
** IPsec Passthrough
  −
  −
* Improvements:
  −
** Added Input/Output default chain policy selections for firewall zones
  −
** Removed IPv6 related options from Setup Wizard
  −
** Improved WebUI page loading speed
  −
** Added a possibility to set MQTT credentials for Modbus Data Sender
  −
** Added options to keep connection open for Modbus TCP Slave
  −
** Added TLS certificate options to HTTP(S) data sending for Modbus data
  −
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
  −
** Added IPsec aggressive host enable option
  −
** Expanded IPSec identifier validation
  −
** Added WiFi SSID field validation
  −
** Changed IP leasing sequence in mobile Passthrough mode
  −
** Added SHA512 support
  −
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
  −
** Added uploaded package signature verification to Package Manager
  −
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
  −
** Changed default WAN Failover values
  −
** Simplified key combination for opening a new CLI tab
  −
  −
* Fixes:
  −
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
  −
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
  −
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
  −
** Fixed configuration field validations in the Modbus MQTT gateway page
  −
** Fixed MQTT topic validation in Modbus pages
  −
** Fixed configuration field validations in the ThingWorx page
  −
** Fixed Periodic Output Control table layout
  −
** Fixed security related issues to file uploading and HTTP headers
  −
** Fixed adding new L2TP and PPTP instances on non-English WebUI
  −
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
  −
** Fixed WiFi SSID string handling in fix_sta_ap.sh
  −
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
  −
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
  −
** Fixed table design in the System → Administration → Access Control → Safety page
  −
** Fixed not setting iptables rules for mobile interface
  −
** Fixed saving APN after firmware upgrade
  −
** Fixed default mobile MTU setting
  −
** Fixed access to LAN page when mobile Bridge mode is enabled
  −
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
  −
** Removed IPv6 Subprefix Hint field from the Network → LAN page
  −
** Fixed DNS push from OpenVPN server
  −
** Fixed L2TP over IPsec with Android 10
  −
** Removed crt_rms deprecated service
  −
** Fixed RMS collecting data usage
  −
** Fixed mobile status error for Load Balancing
  −
** Fixed WAN MAC address value in SMS Utilities command response
  −
** Fixed answer delay for Call Utilities commands
  −
** Fixed key combination not working
  −
** Removed Wireguard from the Network → Status page when this package is not installed
  −
** Changed SNMP RX, TX object types to uint64
  −
  −
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
  −
  −
* Improvements:
  −
** Improved RMS connection establishment
  −
  −
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
  −
  −
*Fixes:
  −
**Fixed Verizon operator APN configuration
  −
  −
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
  −
  −
*Fixes:
  −
**Fixed AT&T operator APN
  −
  −
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
  −
  −
*New features:
  −
**Added sms remote configuration option
  −
**Added "Enable HTTPS" option in "Access Control" page
  −
**Added network frequency band select support for EG25-G modem
  −
**Added additional service mode options to setup wizard
  −
**Added Japanese language support
  −
**Added TLS support to MQTT publisher
  −
**Added mqtt subscriber support
  −
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
  −
**Added ability to install packages stored in backup file
  −
**Full Unicode SMS support
  −
**Added time sync from operator station
  −
**Added ntpclient failover to operator station sync
  −
*Improvements:
  −
**Removed wep encryption from WiFi settings
  −
**Added profile scheduler and default configuration profile
  −
*Fixes:
  −
**Fixed TR-069 wan type value
  −
**removed GRE tunnel option in Events reporting
  −
**Removed config update from server option
  −
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
  −
**Fixed not showing Hotspot users upload/download statistics
  −
**Added ability to write hyphens to static lease hostname.
  −
**Fixed RAM usage display
  −
**Fixed password change URL after firstboot
  −
**Removed change password error message after firstboot
  −
**Fixed Web access Control via SMS Utilities
  −
**Fxed signal strength logging and reporting
  −
  −
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
  −
  −
*Fixes:
  −
**Fixed RMS not displaying data when using WiFi
  −
**Fixed RMS not displaying WAN IP with WAN failover
  −
  −
===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
  −
  −
*Fixes:
  −
**TR-069 WAN type value fix
  −
**RMS batch number instead of product code bug fix
  −
**Added missing HMAC options and PKCS12 support to OpenVPN
  −
  −
===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
  −
  −
*New features:
  −
**Auto APN
  −
**SMS Utilities Auto APN toggling
  −
**Operators control & support for JioAPN
  −
**Package Manager
  −
**RMS wireless monitoring
  −
**Port based VLAN configuration
  −
**I/O power socket pinout image
  −
**VRRP advertisement interval option
  −
  −
*Improvements:
  −
**UPnP updated to version 2.1
  −
**SIM switching optimizations
  −
**Faster SSH private key generation on first boot
  −
**Added network, serving and neighbor cell information to Troubleshoot files
  −
  −
*Fixes:
  −
**Wget Reboot minimal interval for action 'reboot' added
  −
**Ping Reboot packet size 0 fix
  −
**Modbus WebUI fixes
  −
**Modbus WiFi/Mobile on/off fix
  −
**SMS Utilities table validation fix
  −
**SMS Utilities UCI API fixes
  −
**SMS Utilities SMS response status fix
  −
**SMS-Utilities WiFi/Mobile on/off fix
  −
**Clarified WebUI options for SMS Forwarding
  −
**Hotspot Statistics tab shows incorrect information fix
  −
**Hotspot session name validation fix
  −
**Hotspot landing page file upload limits increased
  −
**Fixed MAC address clone configuration
  −
**Fixed sessions table dependency on authentication mode
  −
**Events log network type logging on modem service restart fix
  −
**Events Reporting typos that prevented rules being matched fixes
  −
**WAN Failover option disappearing after language change fix
  −
**Removed unnecessary fix_sta_ap.sh from syslog messages
  −
**Removed OpenVPN converting names to hex
  −
**Added file upload limits
  −
**DDNS name validation fix
  −
**Hostname and router name after backup upload fix
  −
**Mobile Data Limit firewall rule init fix
  −
**Added missing password validation
  −
**Fixed default VRRP config to follow RFC 2338
  −
**Changed packages names in Package Manager
  −
**Input/Output label & functionality fixes
  −
**FOTA memory calculation fix
  −
**Removed "Site Survey" page
  −
  −
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
  −
  −
*New features:
  −
**New flash validation added
  −
  −
*Improvements
  −
**Added reply after mobileon and mobileoff SMS Utilities commands
  −
  −
*Fixes:
  −
**Firmware upgrade with keep settings fix
  −
**PPTP fix when upgrading firmware with keep settings
  −
**Do not autocomplete non-system passwords fix
  −
**Added validation for 'Service mode' change
  −
**VRRP template fix
  −
**Added validation for user group number format
  −
**SMS Gateway: removed new line add after configuration save
  −
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
  −
**NTP time zone options fix
  −
**MQTT bridge with SSL/TLS connection fix
  −
**'Use DNS servers advertised by peer' does not save fix
  −
**'FW update available' fix
  −
**WAN state and IP print fixes
  −
  −
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
  −
  −
*Fixes:
  −
**Increased RMS HTTP Proxy resource limit
  −
  −
===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
  −
  −
*New features:
  −
**SNMP: Individual port status added
  −
**openssl: update to version 1.0.2r
  −
**dropbear: update to version 2019.78
  −
**busybox: update to version 1.30.1
  −
**uci: update to version 2018-08-11
  −
**ubus: update to version 2018-10-06
  −
**ubox: update to version 2019-04-07
  −
**libubox: update to version 2019-02-27
  −
**MQTT: added MQTT support
  −
**WebUI: add additional band support for EC25
  −
**UPnP: UPnP added
  −
**WebUI: add events reporting and reporting configuration support
  −
**Flash: Add XT25F128B flash support
  −
**Strongswan: Custom option added
  −
**WebUI: upload backup from lower firmware version support
  −
  −
*Fixes:
  −
**Wireless: Station availability when two or more Access Points are created fix
  −
**Mobile Graphs: Color and line adjustments
  −
**WebUI: Overview->Network->Topology: WAN Failover redirection fix
  −
**Strongswan: Shared-keys fix
  −
**WebUI: fix input validation issues
  −
**Mobile traffic: graph fixes
  −
**WebUI: fix LEDs Indication setting
  −
**QMI2: set 1st context to IPv4
  −
**Hotspot: Restrict internet access fix
  −
**Hotspot: 'Invalid' prompt after deleting session fix
  −
**IPSec: No shared key validation added
  −
**Email-to-SMS: longer SMS fix
  −
**IPSec: Allow WebUI access with HTTPS fix
  −
**RMS: fixed disable on sysupgrade with keep settings
  −
**WebUI: LEDs Indication hint text fix
  −
**IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
  −
**SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
  −
**Wireless: Regulatory domain and channel change fix
  −
**SMS-Management: Error message after successful SMS send fix
  −
**Services: SNMP Trap redirection fix
  −
**Periodic Control: Rule addition in Chromium fix
  −
**Setup Wizard: Dialing number disappearing fix
  −
**WAN: After interface edit, redirect back to main WAN window fix
  −
**SNMP: Teltonika MIB file fix
  −
**rms_mqtt: HTTPs proxy fix
  −
**rms_json: Fixed WAN State and WAN IP
  −
**Wireless: STA connection loss fix
  −
**QoS: Speed limitation fix
  −
**Stunnel: Removed unnecessay WebUI options, added validation.
  −
**Port Scan Prevention: Disable fix
  −
**Port Scan Prevention: Warning message for remote access added
  −
**ledman: fixed led issue when there is no connection
  −
**ledman: fixed led issue when rebooting router with reset button
  −
**Wireless: Channel frequency dispaly fix
  −
**Administration: RMS 'infobox' fix
  −
**Setup Wizard: RMS 'infobox' fix
  −
**Setup Wizard: Validation and redirection fixes
  −
**VRRP: updated to 1.15 version
  −
**LAN: Static leases fix
  −
**Backup: Redirection to 127.0.0.1 after backup load fix
  −
**Network: 'Use WAN as LAN' availability fix
  −
**WebUI: WAN as LAN when using main WAN WIFI fix
  −
**Network: Delete static protocol options after change to DHCP fix
  −
**L2TP and PPTP: updated services
  −
  −
===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
  −
  −
*New features:
  −
**Added 'More' SMS Utilities rule
  −
 
  −
*Fixes:
  −
**RMS reconnect issue fix
  −
**Hotspot authentication mode change fix
  −
**Overview widget fixes
  −
**Connection uptime widget fix
  −
**SMS Management inbox read fix
  −
**Wireless scan fix
  −
**SSTP service update
  −
**SMS-Utilities: various functionality fixes
  −
**Restore-Point: Removed the ability to load restore points of a different router
  −
**VLAN: LAN Network configuration backup fix
  −
**Maximum length SMS message send fix
  −
**Long SMS messages stretch out WebUI fix
  −
**Ping Reboot: reboots after service is disabled fix
  −
**Removed warning message when scanning for WiFi STA
  −
**Setup Wizard WiFi channel select custom option remove fix
  −
**Call Utilities: double zero in front of the number fix
  −
**Setup Wizard: you cannot procceed with setup if you disable DHCP fix
  −
**Restore to default percentage counting fix
  −
**WoL: Use WAN as LAN fix
  −
**Network Operators: Typo fix
  −
**Events log: Typo fixes
  −
**Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
  −
**Hotspot: configuration saves without advertisement address fix
  −
**WiFi channel frequency display fix
  −
**Mobile Traffic: daily statistics show wrong time fix
  −
**STunnel text display fix
  −
**IPSec text display fix
  −
**OpenVPN remove TLS clients in TAP mode fix
  −
**Hotspot: Tab placement fix
  −
**Overview: Text changes
  −
**SMS-Utilities: 'uci show' fix
  −
**WebUI: added connection band info to mobile status page
  −
**Mobile: fix for LTE band default value for different regions
  −
**RMS: fixed logread messages
  −
**I/O: fixed output state labels
  −
  −
===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22====
  −
  −
*New features:
  −
**Added Wake on LAN functionality
  −
**Added Wake on LAN SMS Utilities rule
  −
**Added STunnel feature to VPN services
  −
  −
*Improvements:
  −
**Added every WAN interface selection to Qos
  −
**Add modem restart option to Periodic Reboot
  −
**Updated curl to version 7.64.0
  −
**Updated OpenSSL to version 1.0.2q
  −
  −
*Fixes:
  −
**L2TP network restart after connection loss fix
  −
**OpenVPN service restart when TLS-Password is changed fix
  −
**Mobile IP and gateway fix
  −
**Overview OpenVPN widget display fix
  −
**IPSec psk_key save after older firmware upgrade fix
  −
**Configuration backup and firmware upgrade stuck on the 'downloading' page fix
  −
**SNMP memory leak fix
  −
**Mobile data limit keep limit after firmware upgrade with keep settings fix
  −
**Remote access information fix
  −
**L2TP IP range change fix
  −
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
  −
**Hotspot firewall rules fix
  −
**Data-only SIM fix
  −
**Wireless Station and Access Point fixes
  −
**Deleted unnecessary IPsec keep alive option
  −
**Fixed GRE Tunnel connection
  −
**Removed NOTRACK target from firewall rules
  −
**WAN IP not showing on Login page fix
  −
**DDNS process kill fix
  −
**WAN selected as LAN fix
  −
**IPSec restart when backup mobile fails fix
  −
**RMS memory usage fix
  −
**CLI Connect button fix
  −
**Mobile traffic counter resetting fix
  −
**Multiple OpenVPN related fixes
  −
**Ping Reboot fix
  −
  −
===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20====
  −
  −
*Fixes:
  −
**SSH security fix
  −
**Mobile page fix
  −
  −
===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
  −
  −
  −
*New features:
  −
**Added NTP server, force servers option for ntpclient
  −
**Added selectable network band support
  −
**Added SSTP
  −
**Replace bird routing package with quagga package
  −
**Added WiFi MAC Filter address range support
  −
**Changed RMS communication protocol to use MQTT instead of OpenVPN
  −
**Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
  −
  −
*Improvements
  −
**Updated mobile operator database
  −
**Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
  −
**Sensitive information (usernames and passwords) removed from router's Troubleshoot file
  −
**Added warnings to Call Utilities when on 4G-only mode
  −
  −
*Fixes:
  −
**Fixed multiwan restart sequence issues causing VPN instabilities
  −
**Static Routes fix
  −
**WiFi updates and security fixes
  −
**Minor improvements and bug fixes for operator selection
  −
**SNMP MIB values and file format fix
  −
**SNMP Hotspot and serial values fix
  −
**Redirect to login page after factory reset fix
  −
**IPsec init script fix
  −
**Overview WiFi widget fix
  −
**Modbus WiFi enable/disable fix
  −
**Modbus APN write and memory leak fixes
  −
**JavaScript code multiplication fix
  −
**DHCP server lease time validation update fix
  −
**Hang up on watchdog reset fix
  −
**Overview mobile WAN IP display fix
  −
**curl: update to 7.62.0
  −
**OpenSSL: update to 1.0.2p
  −
**cacert: update to 2018-10-17
  −
**arptables segmentation fault fix
  −
**quectel-CM: updated to latest version
  −
**GRE Tunnel delete after button press fix
  −
**Update Teltonika contact address in Licenses page
  −
**Disabled passthrough and bridge selection when multiwan is enabled
  −
**Fixed lua dispatcher error after reboot
  −
**Fixed multiwan metrics and priorities
  −
**SMS Utilities SMS status WAN IP with multiwan fix
  −
  −
===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
  −
  −
*Fixes:
  −
**VPN shutdown at delete fix
  −
**PPTP default gateway set and delete fix
  −
**OpenVPN status fix
  −
**OpenVPN configuration section name compatibility fix
  −
**IPsec redirect after save fix
  −
**Overview VRRP widget status fix
  −
**Hotspot start after reboot fix
  −
**Added default LAN IPv6 address
  −
**Overview WAN wiki link fix
  −
**Hotspot overview fix
  −
**Mobile data counter reset fix
  −
  −
===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
  −
  −
*New features:
  −
**Added operators control with white/black list feature
  −
**Added Administration -> Root CA page
  −
  −
*Improvements:
  −
**Added many security updates
  −
**Added firmware update information
  −
**Added CellID information to Troubleshoot file
  −
  −
*Fixes:
  −
**GPL: compilation fixes
  −
**Configuration restore fix
  −
**Disabled Hotspot users' ability to reach LAN devices and WebUI
  −
**Port Forwarding IP validation fix
  −
**System -> Administration -> Overview page loading fix when VPN configuration exists
  −
**Some minor DHCP display fixes
  −
**Call Utilities reboot action partial message fix
  −
**DDNS IP source change and added time selection
  −
**OpenVPN service fixes
  −
**Some minor QoS fixes
  −
**Some minor OpenVPN fixes
  −
**Configuration Wizard: LAN page redirect fix
  −
**Overview WAN IP fix
  −
**Added Redirect to HTTPS information
  −
**Troubleshoot TCPdump fix
  −
**Changed 'Backup WAN' to 'WAN Failover'
  −
**WebUI: language translation in some pages fix
  −
**Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
  −
**Overview VPN widget IP fix
  −
  −
===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
  −
  −
*Fixes:
  −
**Fixed GPL Readme
  −
**Fixed JavaScript password validation
  −
  −
===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
  −
  −
*Fixes:
  −
**Fixed RMS status in overview page
  −
**Fixed LTE signal strength graph
  −
  −
===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
  −
  −
*New features:
  −
**Added DHCP Force option
  −
**Added RMS connection page to Setup Wizard
  −
**Added forced password change
  −
  −
*Improvements:
  −
**Updated Overview widget icons, added Teltonika Wiki links
  −
**Added private key decryption function to OpenVPN client configuration
  −
**Added additional DPD options
  −
  −
*Fixes:
  −
**Fixed Wget reboot URL datatype
  −
**WebUI: SSH access status fix
  −
**Added special symbols exception to SMS-Forwarding
  −
**Added missing Events Reporting config for SMS-Utilities
  −
**PPP enable/disable bug fix
  −
**Multiple Call Utilities fixes
  −
**SMS event queries fix
  −
**Removed unnecessary sim_switch message text
  −
**Some SSH security fixes
  −
**Updated Modbus sources and coding table
  −
**Multiple OpenVPN bug fixes
  −
**Graphs/Signal strength fix when using HSDPA+HSUPA network type
  −
**Fixed VLAN DHCP leasing
  −
**Administration password change fix
  −
**STA mode logic changed
  −
**Hotspot bandwith limit fix
  −
**Moved IP alias gateway to advanced features
  −
**Administration -> Overview fix
  −
**Factory reset fix due to mobile connection problems
  −
  −
===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
  −
  −
*Improvements:
  −
**Added hostname validation for Wget Reboot
  −
**New versioning logic
  −
  −
*Fixes:
  −
**Output ON/OFF fix
  −
**Firmware Upgrade fix
  −
**SSH authentication logging fix
  −
  −
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
  −
  −
*New features:
  −
**Added Redirect LAN to GRE function
  −
  −
*Fixes:
  −
**Mobile Data Limit fixes
  −
**User's password removed from users table
  −
**Firmware upgrade message fixed
  −
  −
===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
  −
  −
*Fixes:
  −
**Minor Openvpn functionality fixes
  −
  −
===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
  −
  −
*New features:
  −
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
  −
  −
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
  −
  −
*Fixes:
  −
**Updated SMS send satus
  −
**Added Modbus enable check-box
  −
**Added firewall rule so the router would be reachable from WAN when access control is enabled
  −
  −
===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
  −
  −
*Improvements:
  −
**Added download MIBS button to SNMP page
  −
  −
*Fixes:
  −
**Fixed style for VPN service pages, Modbus page
  −
  −
===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
  −
  −
*New features:
  −
**Added Relayd function that can make the router act like a wireless range extender
  −
  −
===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
  −
  −
*Fixes:
  −
**Fixed Wi-Fi logging to FTP function
  −
**Fixed site blocking file parsing
  −
**System Information texts fix
  −
  −
===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
  −
  −
*New features:
  −
**IPsec: added Transport mode, Firewall options, local IP management options
  −
  −
*Improvements:
  −
**Moved Disable NAT flags from VPN to Firewall page
  −
  −
*Fixes:
  −
**Fixed Firewall config for hotspot interface assignment
  −
**DMZ rule position fix
  −
  −
===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
  −
  −
*Improvements:
  −
**Added binero.se to DDNS service providers list
  −
**Added some additional SMS Utilities hints
  −
**Added support for changing Wireless SSID name from branding script
  −
**Improved Email to SMS function
  −
  −
*Fixes:
  −
**WAN port status display fix
  −
**Fixed SMS Utilities Write to config bug when sending mobileoff message
  −
**Whitelist blocking fix in Site Blocking
  −
  −
===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
  −
  −
*New features:
  −
**Added WPA-Enterprise encryption type support for Wi-Fi Access Points
  −
**Added Email To SMS, SMS Forwarding functions
  −
**Added Wget Reboot function
  −
  −
*Improvements:
  −
**Updated fw upgrade validation for future firmwares
  −
  −
*Fixes:
  −
**Fixed bug of not being able to use hostnames as a destination for Ping Reboot
  −
**Input/Output Scheduler backup bug fix
  −
**System->Administration page style fixes
  −
**Removed wifid due to security issues
  −
**Configuration Backup bug fixes
  −
  −
===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
  −
  −
*New features:
  −
**Added IPsec option for WebUI access through tunnel
  −
**Added Reset button custom hold time configuration
  −
  −
*Fixes:
  −
**Minor Mobile Data Limit bug fix
  −
**Renamed mibs file to TLT-MIB.txt
  −
**Temperature display fix
  −
**Added Async Control Character Maps
  −
**Fixed minor grammatical errors in the WebUI
  −
**OpenVPN hints fix
  −
  −
===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
  −
  −
*Fixes:
  −
**Some minor PPTP Server and Client functionality fixes
  −
**Added fix to PPP Connection Type due to disconnecting mobile connection
  −
**Real traffic fix
  −
  −
===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
  −
  −
*New features:
  −
**Added Hotspot configuration profiles
  −
  −
*Improvements:
  −
**Added custom redirect address
  −
**Added troubleshoot file download protection
  −
  −
*Fixes:
  −
**Some minor Hotspot functionality fixes
  −
**Mobile data logging fix
  −
**Some minor Dynamic DNS functionality fixes
  −
  −
===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
  −
  −
*Improvements:
  −
**SMS Utilities fw_upgrade rule now works with Keep Settings
  −
  −
*Fixes:
  −
**Minor Reregister function fix
  −
**Use IPv4 only fix
  −
**Minor mobile interface fix
  −
**Some minor Site Blocking fixes
  −
**Connect to hidden WiFi AP fix
  −
**Multiwan metric change fix for RUT230
  −
  −
===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
  −
  −
*Improvements:
  −
**Improved Mobile Data Limit functionality
  −
**Improved Load Balancing functionality
  −
<!--
  −
  −
===Bootloader Change Log===
  −
----
  −
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
  −
  −
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
  −
  −
*Improvements:
  −
**Updated links to teltonika-networks.com
  −
  −
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
  −
  −
*New features:
  −
**Added all LED indication on device power on.
  −
  −
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
  −
  −
*Improvements:
  −
**Improvements made to the boot up process
  −
  −
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
  −
  −
*New features:
  −
**Added GigaDevice flash support
  −
  −
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
  −
  −
*Improvements:
  −
**Increased CPU clock speed to 400MHz
  −
  −
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
  −
  −
*New features:
  −
**Released U-boot
  −
-->
 

Navigation menu