90
edits
Changes
Template:Networking RUTOS FAQ Band Lock (view source)
Revision as of 12:27, 23 March 2022
, 12:27, 23 March 2022no edit summary
The steps to select and lock LTE bands on Teltonika devices are as follows:
The steps to select and lock LTE bands on Teltonika devices are as follows:
#Open device‘s WebUI and go to '''Network''' -> '''Mobile''' -> '''General'''.
#Open device‘s WebUI and go to '''Network''' -> '''Mobile''' -> '''General'''.
#If necessary, select the SIM card you want to apply band locking.
#If necessary, select the SIM card you want to apply band lock to.
#Under the SIM card settings section, select Service mode '''4G (LTE) only''', otherwise, in case no LTE signal and depending on availability, the router will switch to 3G or 2G bands.
#Under the SIM card settings section, select Service mode '''4G (LTE) only''', otherwise, in case no LTE signal and depending on availability, the router will switch to 3G or 2G bands.
#Set the Band selection to '''Manual'''.
#Set the Band selection to '''Manual'''.
