489
edits
Changes
no edit summary
* Access your devices WebUI by typing your Routers Private or Public IP in you browser (my router has private IP 192.168.1.1)
* Access your devices WebUI by typing your Routers Private or Public IP in you browser (my router has private IP 192.168.1.1)
* Next navigate to: '''Network > Vlan > Port Based'''
* Next navigate to: '''Network > Vlan > Port Based'''
* Now you'll need to add new VLAN and change first VLAN (ID:1) configuration. So basically you need to choose witch port you will use for yourself and turn that port Off in VLAN (ID:1). In my example I've choosen second ethernet port for myself.
* Now you'll need to add new VLAN and change first VLAN ('''ID:1''') configuration. So basically you need to choose witch port you will use for yourself and turn that port Off in VLAN ('''ID:1'''). In my example I've chosen second Ethernet port for myself.
I've turned off in first VLAN's LAN 2 port and in my new VLAN 3 I've turned on (by choosing Untagged) LAN2 port:
I've turned '''off''' in first '''VLAN's LAN 2''' port and in my new '''VLAN 3''' I've turned '''on''' (by choosing '''Untagged''') '''LAN2''' port:
[[File:Vlan1.png|thumb]]
[[File:Vlan1.png|thumb|alt=|center|824x824px]]
*Press '''Save & Apply'''
==Creating Interface's==
*Now navigate to '''Network > Interfaces'''
*Add a new instance, by entering any interface name and pressing '''ADD''' button:
[[File:Vlan2.png|center|thumb|948x948px]]
*Now a new window for your interface configuration will pop up:
*#For protocol select "'''Static'''"
*#For IPv4 type IP of your choice with different subnet. For example if you are using default router configurations your device should have IP: '''192.168.1.1''' and netmask: '''255.255.255.0''', for this example we can change only one number, type: '''192.168.2.1'''
*#For Netmask you can leave it default: '''255.255.255.0'''
*#Press the button "'''SETUP DHCP SERVER'''"
*#And leave everything else default, your configuration should look like this:
[[File:Vlan3.png|center|thumb|632x632px]]
*Next go to the "'''PHYSICAL SETTINGS'''"
*Select your newly created VLAN in Interface drop-down (it should be named '''eth0.3'''):
[[File:Vlan4.png|center|thumb|761x761px]]
*Press "'''SAVE & APPLY'''" button
*If you've configurated everything correctly your new Interface should be running like in my case:
[[File:Vlan5.png|center|thumb|954x954px]]
==Testing new VLAN==
Now by plugging my PC in Ethernet cable with RUTX11 LAN2 port you need to check if everything is working correctly. To do that you'll need:
*On your Windows machine open '''CMD''' (you can do it by typing in Windows search "'''CMD'''" and press '''Enter'''):
[[File:Vlan6.png|center|thumb]]
*In CMD type command "'''ipconfig'''", press '''Enter''' and search for '''Ethernet adapter''' and check if you got '''IP''' address like I did ('''192.168.2.x'''):
[[File:Vlan7.png|center|thumb|499x499px]]
If you did, then you've done everything correctly, if you didn't go trough all set up again and check if you have missed anything.
==Setting up data limit on interface==
This step is optional, complete this if you need to limit internet data on one of your interface (or both).
You'll need to create '''QoS''' configuration, for this you'll need to download '''QoS''' package in '''Services > Package Manager > Packages''' and limit internet speed for interface that you want to be limited.
Note: If you set '''QoS''' for the '''LAN''' interface, the direction logic is naturally inverted. Egress means "from router towards '''LAN'''" = in practice "download from '''WAN''' forwarded to '''LAN'''".
On more detailed information about how to configurate QoS and how does it work you can read [https://wiki.teltonika-networks.com/view/RUTX11_Traffic_Shaping here].
[[Category:Networking]]
