31
edits
Changes
Added images for the IP settings
* Router's WAN IP address: 192.168.2.1/24
* Router's WAN IP address: 192.168.2.1/24
* Computer's IP address: 192.168.2.2/24
* Computer's IP address: 192.168.2.2/24
In order to edit the WAN IP address of the device, you will need to go to '''Network → Interfaces''' and then click on the '''Edit''' [[File:Networking rutx manual edit button v1.png|frameless]] button for the '''WAN''' connection.
[[File:Network Interfaces WAN Edit.png|frameless|1100x1100px]]
After clicking on '''Edit''', a new window will open. Here, you will need to click on '''DHCP''' as shown in point 1, and then click on '''Static''', as shown in point 2.
[[File:DHCP to Static.png|frameless|1062x1062px]]
Next, you will need to fill out the IP address fields, first, with the IP address '''192.168.2.1''' and the netmask '''255.255.255.0'''.
[[File:Entering IP addresses.png|frameless|1045x1045px]]
Then finally, click on the [[File:Save & Apply Button.png|frameless]] button to save the changes.
Once you have set up the IP addresses for the devices, you can continue over to the next step.
Once you have set up the IP addresses for the devices, you can continue over to the next step.
