Changes

2,022 bytes added ,  13:43, 5 April 2022
Created page with "This wiki page contains information about BAT120 <b>LEDs</b> and their actions. __TOC__ ==Power IN LED== The <b>IN PWR LED</b> is the left-most located LED on the front pan..."
This wiki page contains information about BAT120 <b>LEDs</b> and their actions.

__TOC__

==Power IN LED==

The <b>IN PWR LED</b> is the left-most located LED on the front panel:

[[File:Network_bat_manual_bat120_pwrin_led_v1.png|400px]]

<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>LED turned ON</td>
<td>PSU connected to IN PWR socket</td>
</tr>
</table>

==Power OUT LED==

The <b>OUT PWR LED</b> is the second from the left LED located on the front panel:

[[File:Network_bat_manual_bat120_pwrout_led_v1.png|400px]]

<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>LED turned ON</td>
<td>OUT PWR socket connected to the device</td>
</tr>
</table>

==Power LEDs==

The <b>Power LEDs</b> are located in the middle of the front panel:

[[File:Network_bat_manual_bat120_pwr_led_v1.png|400px]]

<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>LED turned ON</td>
<td>Shows BAT120 state of charge. Each LED equals to 25% of SOC.</td>
</tr>
</table>

==Combined LED states==

Some of the states are shown with multiple LEDs:

<table class="nd-othertables_2">
<tr>
<th style="width: 550px>Action</th>
<th style="width: 550px>Description</th>
</tr>
<tr>
<td>All LEDs blinking every 500ms</td>
<td>BAT120 overheated.</td>
</tr>
<tr>
<td>OUT PWR LED blinking every 500ms</td>
<td>OUT PWR shorted.</td>
</tr>
<tr>
<td>Power LEDs lighting up in sequence</td>
<td>BAT120 is charging.</td>
</tr>
<tr>
<td>Power LEDs blink every 5 seconds</td>
<td>BAT120 is in sleep mode.</td>
</tr>
</table>


[[Category:BAT120 Manual]]

Navigation menu