577 bytes added
, 14:07, 5 April 2022
==Hardware installation==
<ol>
<li>Connect Teltonika Network device power input (<b>PWR</b>) with BAT120 power output (<b>OUT PWR</b>) using provided 4-pin to 4-pin cable.</li>
<li>Connect PSU 4-pin plug to BAT120 power input (<b>IN PWR</b>) to power up BAT120 and the end device.</li>
</ol>
==BAT120 Charging==
<ol>
<li>Set On/Off slider located on BAT120 front panel to On.</li>
<li>Connected provided PSU to IN PWR socket.</li>
<li>As BAT120 starts charging, it will also power the Teltonika Network device connected to the OUT PWR socket.</li>
</ol>