Line 9: |
Line 9: |
| | | |
| == [[Introduction]] == | | == [[Introduction]] == |
− | kugtvutiovfc
| + | This article provides information and step by step guide to configure samba share on Teltonika routers. |
| | | |
− | ytgc7ol
| + | The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. |
| | | |
− | uctxyrikfl
| + | Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for udp, 039 and 445 for tcp. |
| + | |
| + | == Prerequisites == |
| + | You will need: |
| + | |
| + | * RUTX router running FW version RUTX_R_00.07.01.4 or newer. |
| + | * A computer running Windows OS. |
| + | * A USB flash drive. |
| + | |
| + | == Instructions == |
| + | |
| + | # Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi. |
| + | # Login to the router's WebUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted. |
| + | # |