Changes

==Logs Verification==

==Logs Verification==

If you have followed the steps above, you should have correctly setup your DDNS service. However, for debugging purpuses, you can verify the DDNS generated logs by executing in the Command-Line interface the command: '''cat /tmp/logs/ddns/{yourddnsinstance.log}''' . This command will show you the current ddns configuration and the messages beetween noip.com servers and your router everytime it sends its updates. In the picture below, you will find a log message response from noip.com server at the moment of successfully updating the new IPv6 address:

After following the steps above, the DDNS service should be up and running. However, for debugging purposes, you can verify the DDNS generated logs by executing in the Command-Line interface the command: '''cat /tmp/logs/ddns/{yourddnsinstance.log}''' .This command will show you the current ddns configuration and the messages between noip.com servers and your router every time it sends its updates. In the picture below, you will find a log message response from the noip.com server at the moment of successfully updating the new IPv6 address:

 

[[File:Logs2DDNS.png|900px|center]]

[[File:Logs2DDNS.png|900px|center]]

==See Also==

==See Also==