Changes

Line 26: Line 26:  
The reset button has two functions:
 
The reset button has two functions:
 
<ul>
 
<ul>
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing of all {{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1=3|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}
+
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing of all {{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1=3|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot.{{#switch:{{{name}}}|RUTX08|RUTX10=|#default= Signal strength LEDs indicate the elapsed time while holding the reset button. When all 5 LEDs light up, it indicates that 5 seconds have passed and the reset button can be released. Start of the factory reset will be indicated by flashing of all 5 signal strength LEDs 5 together with a red connection status LED.}}<br><b>Additional note</b>: the default button hold time value (5 seconds) can be changed in the router's WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
+
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot.{{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default= Signal strength LEDs indicate the elapsed time while holding the reset button. When all 5 LEDs light up, it indicates that 5 seconds have passed and the reset button can be released. Start of the factory reset will be indicated by flashing of all 5 signal strength LEDs 5 together with a red connection status LED.}}<br><b>Additional note</b>: the default button hold time value (5 seconds) can be changed in the router's WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
 
</ul>
 
</ul>
  

Navigation menu