Changes

'''FIREWALL'''

'''FIREWALL'''

* To achieve end-to-end client communication you need to configure the tinc zone '''Network->Firewall->General''', that was created at the installation. Press the edit button to configure it.[[File:Tincfirewall1.png]]

1. To achieve end-to-end client communication you need to configure the tinc zone '''Network->Firewall->General''', that was created at the installation. Press the edit button to configure it.[[File:Tincfirewall1.png]]

[[File:Tincfirewall2.png]]

[[File:Tincfirewall2.png]]

* 2. Open ''Allow forward to destination zones'' list.

2. Open ''Allow forward to destination zones'' list.

* 3. Select '''lan''' zone, this will allow us to access LAN network from outside via tinc VPN.

3. Select '''lan''' zone, this will allow us to access LAN network from outside via tinc VPN.

[[File:Tincfirewall3.png]]

[[File:Tincfirewall3.png]]

* 4. Open ''Allow forward from source zones'' list.

4. Open ''Allow forward from source zones'' list.

* 5. Select '''lan''' zone, so we can access outside networks via tinc VPN too.

5. Select '''lan''' zone, so we can access outside networks via tinc VPN too.

* 6. Press '''Save & Apply'''

6. Press '''Save & Apply'''

We are going to allow all forwards via this interface, including '''lan''' and '''wan networks''' into this zone. This way we can communicate from END1 to RUT2’s lan as well as END2 and vice versa.

We are going to allow all forwards via this interface, including '''lan''' and '''wan networks''' into this zone. This way we can communicate from END1 to RUT2’s lan as well as END2 and vice versa.