Changes

Template:Networking rutos monitoring via modbus (view source)

Revision as of 11:22, 27 October 2022

362 bytes removed ,  11:22, 27 October 2022
no edit summary
Line 29: Line 29:     
Modbus TCP can be used to both '''get''' and '''set''' certain router parameters. First lets do an overview of how to obtain parameters via Modbus TCP. Please keep in mind that in order to get routers parameters when using '''[https://wiki.teltonika-networks.com/view/{{{name}}}_Modbus#Requests_configuration Request Configuration]''' you need to use '''Register Number''' instead of '''Register Address'''.
 
Modbus TCP can be used to both '''get''' and '''set''' certain router parameters. First lets do an overview of how to obtain parameters via Modbus TCP. Please keep in mind that in order to get routers parameters when using '''[https://wiki.teltonika-networks.com/view/{{{name}}}_Modbus#Requests_configuration Request Configuration]''' you need to use '''Register Number''' instead of '''Register Address'''.
−
  −
===List of parameters===
  −
----
  −
Router parameters are held within '''registers'''. Each register contains 2 bytes of information. For simplification the number of registers for storing numerical values is 2, while the number of registers for storing text information is 16. The register addresses and corresponding system values are described in the table below:
      
{{Template:Networking_rutos_manual_modbus_modbus_tcp_get_parameters_table
 
{{Template:Networking_rutos_manual_modbus_modbus_tcp_get_parameters_table
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/97563"

Navigation menu