Changes

This section contains a detailed guide on how to execute an action from RUT1 when Input 1 is being trigger. Action will send an SMS message to a RUT2 and change the device Output state to a high.

This section contains a detailed guide on how to execute an action from RUT1 when Input 1 is being trigger. Action will send an SMS message to a RUT2 and change the device Output state to a high.

===RUT 2===

===RUT 2===

First, let's configure a RUT2 router.

This section contain information on how to configure RUT2 device.

----

----

====SMS Utilities configuration====

====SMS Utilities configuration====

For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.  

For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.  

===RUT 1===

===RUT 2===

----

----

====Remote access====

====Remote access====

----

----

* Navigate to '''System → Administration → Access Control'''

* Navigate to '''System → Administration → Access Control'''

[[File:Access control rutos.png|border|center|class=tlt-border|1004x1004px]]

[[File:Access control rutos.png|border|center|class=tlt-border|1004x1004px]]

====SMS Gateway configuration====

====SMS Gateway (Post/Get) configuration====

----

----

Go to the '''Services → Mobile Utilities → SMS Gateway page''';

Go to the '''Services → Mobile Utilities → SMS Gateway page''';