1,108
edits
Changes
no edit summary
* An end device (PC, Laptop, Tablet, Smartphone) for configuration;
* An end device (PC, Laptop, Tablet, Smartphone) for configuration;
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should >turn on "Advanced WebUI" mode</b>. . You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should >turn on "Advanced WebUI" mode</b>. . You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
[[File:Basic WebUI Advanced.gif|border|center|class=tlt-border|1004x1004px]]
[[File:Basic WebUI Advanced.gif|border|center|class=tlt-border|1004x1004px]]
'''Note:''' Not marked fields can be left as default.
'''Note:''' Not marked fields can be left as default.
----
===RUT 1===
===RUT 1===
This section contains RUT1 I/O Juggler configuration.
This section contains RUT1 I/O Juggler configuration.
'''Note:''' Not marked fields can be left as default.
'''Note:''' Not marked fields can be left as default.
----
=====General tab=====
=====General tab=====
The General section is used to Input Trigger rules, which can perform a specified user-configured action when the Input state changes
The General section is used to Input Trigger rules, which can perform a specified user-configured action when the Input state changes
'''Note:''' Not marked fields can be left as default.
'''Note:''' Not marked fields can be left as default.
----
==Via Public IP==
==Via Public IP==
For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.
For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.
