505
edits
Changes
Template:Networking tsw1xx manual powering options (view source)
Revision as of 17:08, 28 November 2022
, 17:08, 28 November 2022no edit summary
<b>{{{name}}} Batch 001 onwards:</b> use UTP (Unshielded) cable only when connecting non-Active PoE (non-803.3af/at) equipment or make sure that these devices support voltages, provided by TSW100 PSU.
<b>{{{name}}} Batch 001 onwards:</b> use UTP (Unshielded) cable only when connecting non-Active PoE (non-803.3af/at) equipment or make sure that these devices support voltages, provided by TSW100 PSU.
| TSW101 =
| TSW101 =
}}
{{#switch:{{{name}}}
| TSW100|TSW101= ==Disclaimer: {{{name}}} and Passive PoE devices==
There are a couple of options to stay safe when using {{{name}}} '''Active PoE''' with devices that only support '''Passive PoE''':
* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use {{{name}}} PoE ports with '''LAN1''' ports on Teltonika devices).
* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).
}}
}}
[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]
