TRB255 UDP Broadcast Relay
Main Page > EOL Products > TRB255 > TRB255 Manual > TRB255 WebUI > TRB255 Network section > TRB255 UDP Broadcast Relay
The information in this page is updated in accordance with firmware version TRB2_R_00.07.14.3.
Summary
This manual page provides an overview of UDP broadcast relay page in TRB255 devices.
UDP Broadcast Relay
The UDP Broadcast Relay will listen for broadcast traffic on the specified interface port and relay that traffic to the specified interface(s).
Note: UDP Broadcast Relay is additional software that can be installed from the System → Package Manager page.
The Static Lease list is empty by default. To add a new Static Lease click the 'Add' button.
Appears static lease, which should look similar to this:
| Field | Value | Description |
|---|---|---|
| Source interface | lan ; default: lan | The interface from which the traffic will be redirected to. |
| Port | integer [0..655353]; default: none | Specify a port which the UDP broadcast relay will listen on for incoming packets to relay. |
| Destination interface | lan ; default: none | UDP broadcast relay destination interfaces. Open port 137 in firewall so LAN could be reachable from WAN. |
| Enable | off | on; default: off | Turns UDP Broadcast Relay on or off. |