TRM240 First Start
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRM240 LTE Cat1 modem. Here you will find an overview of the various components found on the front and back sides of a TRM240 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with the Quick Start Guide before using the device. If you own a TRM240 device, you can also find a printed version of the Quick Start Guide in the device's package.
|1||Mobile antenna connector|
Instructions to install drivers
Watch the instructional GIF below to learn how to install TRM drivers.
Enable Internet Connection
In network connection window automatically creates a cellular network.
- Click on the Windows start button.
- Go to Network & Internet settings.
- Activate the mobile data by clicking on the Mobile button.
If you need to enter APN settings:
- Right-click on Mobile.
- Go to Mobile -> Advance options.
- Add a new APN in APN settings by clicking on the "Add an APN" button.
- Enter the required information and save.
Testing Mobile connection
Testing mobile internet connection:
- Open the Command Prompt.
- After typing ping 126.96.36.199 there should be an answer.
TRM240 modem must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilixation of the communication module in prescribed applications and environments.
|RF technologies||2G, 3G, 4G (LTE Cat1)|
|Max. RF power||33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE|
|Bundled accessories specifications*|
|GSM/LTE antenna||698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector|
* Order code dependent.
** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.