From Teltonika Networks Wiki
Main Page > TSW Switches > TSW010 > TSW010 Manual > TSW010 LEDs

This wiki page contains information about TSW010 switch LEDs and their actions.

Power LED

The power LED is located on the bottom left corner of the front panel, near the power connector:

Network tsw010 manual tsw100 pwr led v1.png

It can perform two different actions:

Action Description
LED turned ON Switch is powered up
LED turned OFF Switch is not power up

Ethernet port

There is one LEDs located at the top-left of each Ethernet port (top-right green port is unused).

Networking tsw010 manual leds ethernet leds.png

They provide information on the current states of the Ethernet ports. Each port has one LED:

  • Orange - 10/100 Mbps connection

Below is an explanation on the behaviours of orange LEDs.

State Description
LED on A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).
LED off No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).
LED blinking Connection established and data is being transferred over this port.