TSW100 First Start
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW100 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW100 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW100 switch, you can also find a printed version of the Quick Start Guide in the device's package.
|1||4 pin power socket|
|4||PoE powered Ethernet port|
4 pin power socket
|1||Orange LED lit||10/100 Mbps link established|
|2||Orange LED blinking||Active link connection|
|3||Green LED lit||1000 Mbps link established|
TSW100 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
|Input voltage range*||7 - 58 V|
|Max power consumption||<9 W|
|Max PoE power budget at PSE**||120 W|
|Max Ethernet cable length||100 m|
|Bundled accessories specifications***|
|Power adapter||Input: 1.8 A @ 100-240 VAC, Output: 50 VDC, 1.3 VDC, 4 pin plug|
* PoE operates properly only when connected power supply outputs 44 V or higher voltage.
** Default Teltonika provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE, a >130 W power supply must be used.
*** Order code dependant.