TSW200 First Start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW200 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW200 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW200 switch, you can also find a printed version of the Quick Start Guide in the device's package.

Front view

No.	Description
1	2 pin power socket
2	Power LED
3	LAN LEDs
4	PoE powered Ethernet ports
5	SFP port
6	SFP LEDs

Back view

No.	Description
1	Grounding screw

Connectors

2 pin power socket

No.	Description	Wire color
1	Power	Red
2	Ground	Black

Ethernet port

No.	Action	Describtion
1	Orange LED lit	10/100 Mbps link established
2	Orange LED blinking	Active link connection
3	Green LED lit	1000 Mbps link established

SFP port

No.	Action	Describtion
1	Down LED lit	Lower port link established
2	Down LED blinking	Lower port active traffic
3	Up LED lit	Upper port link established
4	Up LED blinking	Upper port active traffic

Safety information

TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Technical specifications
Input voltage range*	7 - 57 V
Max power consumption	5.5 W
Max PoE power budget at PSE	240 W
Max Ethernet cable length	100 m

* PoE operates properly only when connected power supply outputs 44 V or higher voltage.

This sign on the package means that is necessary to read the User's Manual before you start using the device

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste