From Teltonika Networks Wiki
Main Page > TSW Switches > TSW210 > TSW210 Manual > TSW210 LEDsThis wiki page contains information about TSW210 switch LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the front panel, near the power connector:
It can perform two different actions:
Action |
Description |
LED turned ON |
Switch is powered up |
LED turned OFF |
Switch is not power up |
Ethernet port
No. |
Action |
Describtion |
|
1 |
Orange LED lit |
10/100 Mbps link established |
2 |
Orange LED blinking |
Active link connection |
3 |
Green LED lit |
1000 Mbps link established |
|
|
|
SFP port
No. |
Action |
Describtion |
|
1 |
Down LED lit |
Lower port link established |
2 |
Down LED blinking |
Lower port active traffic |
3 |
Up LED lit |
Upper port link established |
4 |
Up LED blinking |
Upper port active traffic |
|
|
|