TSW212 Interfaces

From Teltonika Networks Wiki
Main Page > TSW Switches > TSW212 > TSW212 Manual > TSW212 WebUI > TSW212 Network section > TSW212 Interfaces

The information in this page is updated in accordance with firmware version .

Summary

The Interfaces page is used to to set up network interfaces.

This manual page provides an overview of the Interfaces page in TSW212 devices.

Network Interfaces

The Network Interfaces section displays interfaces currently existing on this device.

Networking rutos manual tswos interfaces network interfaces v1.png

Add Interface

The Add Interface section is used to create additional network interfaces. To create a new interface, simply enter a custom name for it and click the 'Add' button.

Networking tswos manual interfaces add interface.png

Interfaces Setup


Networking tswos manual interfaces.png

Field Value Description
Enable off | on; default: off Toggle interface on or off
Protocol Static | DHCP | DHCPv6; default: Static Operation protocol of a network interface. Possible modes: Static: Manually configured device with a constant IP address that never changes. DHCP: Protocol that automatically provides temporary IP address to the device that could change on a regular basis. DHCPv6: The primary distinction between DHCPv6 and DHCP is that DHCP uses MAC addresses to identify clients, whereas DHCPv6 uses Unique Identifiers.
VLAN vlan1; default: vlan1 Logical overlay network that will be used to isolate the traffic for each group of devices that share a physical LAN
IPv4 address string; default: none Your router's address on the network
IPv4 netmask netmask; default: 255.255.255.0 Netmask defines how 'large' a network is
IPv4 gateway gateway; default: none The IPv4 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.
IPv6 address IPv6; default: none Assigns an IPv6 address for this interface. CIDR notation: address/prefix
IPv6 gateway gateway; default: none The IPv6 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.
DNS servers default: none Servers that will be used for matching website hostnames (e.g. example.com) to their corresponding Internet Protocol or IP addresses. Both IPv4 and IPv6 addresses may be used