Template:Networking rut9xx manual network legacy

From Teltonika Networks Wiki

The information in this page is updated in accordance with the RUT9XX_R_00.06.08.3 firmware version.

Note: this user manual page is for {{{name}}}'s old WebUI style available in earlier FW versions. [[{{{name}}} Network|Click here]] for information based on the latest FW version.

Summary[edit source]

The Network page contains information related to the device's networking features. This chapter is an overview of the Network page in {{{name}}} devices.

{{Template:Networking_rutxxx_manual_network_mobile_{{{mobile}}} | name = {{{name}}} | file_mobile = {{{file_mobile}}} }}

{{Template:Networking_{{{series}}}_manual_network_wan | name = {{{name}}} | file_wan = {{{file_wan}}} }}

LAN[edit source]

The LAN section displays information about your Local Area Network and active DHCP leases.

LAN Information[edit source]


The LAN Information section contains data on the router's LAN interface(s). The figure below is an example of the LAN Information section:

[[File:{{{file_lan_information}}}]]

Field Description
Name LAN interface name
IP address Router's LAN IP address
Netmask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device
Ethernet MAC address Router's LAN MAC address
Connected for LAN interface uptime

DHCP Leases[edit source]


The DHCP Leases section contains information on DHCP clients that hold active DHCP lease. The figure below is an example of the DHCP Leases section:

[[File:{{{file_dhcp}}}]]

Field Description
Hostname DHCP client's hostname.
IP address DHCP client's IP address.
LAN name LAN interface name through which the client is connected to the router.
MAC address DHCP client's MAC address.
Lease time remaining Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes. DHCP lease settings can be changed in the Network → LAN → [[{{{name}}} LAN#General|DHCP Server]] section.

Ports[edit source]


The Ports displays an image of the router's front panel with highlighted Ethernet ports that are currently in use. The Refresh button refreshes all information fields in the page. The figure below is an example of the Ports section:

[[File:{{{file_lan_ports}}}]]

Wireless[edit source]

The Wireless section displays information about wireless connections and associated WiFi stations.

Wireless Information[edit source]

The figure below is an example of the Wireless Information section:

Networking rut2 manual network wireless information.png

Field name Description
Channel Currently used channel. In most countries there are 13 WiFi channels on the 2.4 GHz band (14 in Japan) to choose from
Country Code Indicates currently used country code (SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard)

Wireless Status[edit source]


The Wireless Status section contains information about Wireless Access Points. The figure below is an example of the Wireless Status section:

Networking rut2 manual network wireless status.png

Field name Description
SSID The broadcasted SSID (Service Set Identifier) of the wireless network
Mode Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks
Encryption The type of WiFi encryption used
Wireless MAC The MAC (Media Access Control) address of the access point radio
Signal Quality The signal quality between router's radio and some other device that is connected to the router
Bit rate The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP)

Associated Stations[edit source]


The Associated Stations section contains information about devices that are connected to Wireless Access Point. The figure below is an example of the Associated Stations section:

Networking rut2 manual network wireless associated.png

Field name Description
MAC address Associated station's MAC (Media Access Control) address
Device Name Currently connected device name
Signal Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm
RX rate The rate at which packets are received from associated station
TX rate The rate at which packets are sent to associated station

OpenVPN[edit source]

The OpenVPN section displays information about the OpenVPN connection (either client or server).

Status network openvpn.PNG

Field name Description
Enabled Indicates whether OpenVPN server/client is enabled or not
StatusShows connection status
Type Shows whether the router is a server or client
IP Router's OpenVPN IP address
Mask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device
TimeShows OpenVPN connection uptime

VRRP[edit source]

The VRRP section displays VRRP status information.

Status network vrrp.PNG

Field name Description
StatusShows whether VRRP is enabled or not
Virtual IP Virtual IP address for LAN's VRRP cluster
Priority Indicates router's priority
Router Shows whether the router is Master or Backup

Topology[edit source]

The Topology section is a visual representation of your LAN network.

[[File:{{{file_topology}}}|border|class=tlt-border]]

Access[edit source]

Access Information[edit source]


The Access Information section displays the status of both local and remote SSH, HTTP and HTTPS access and shows the number of current connections to your router through each of those protocol.

Status network access info.PNG

Field name Description
TypeShows access type
Status Indicates whether that access type is enabled or not
Port Shows which port which type of access uses
Active connections Currently active connections count and data usage

Last Connections[edit source]


The Last Connections section displays three of the last local and remote connections to your router via SSH, HTTP and HTTPS and their status (either failed or successful).

Status network access last.PNG

Field name Description
TypeShows access type
Date Indicates connection date
IP Shows what IP address connected
Authentication Status Shows whether authentication was successful or not

Wireguard[edit source]

Displays the status of Wireguard connections (if any exist).

Networking rut manual network wireguard.png

Field name Description
Name Wireguard instance name.
Public key Indicates whether a public key exist in the configuration or not.
Firewall Mark Indicates whether a firewall mark exist in the configuration or not.
Enpoint Remote peer address:port.
Latest handshake Indicates how long ago was the latest connection with this peer.
Transfer RX/TX The number of Received (RX) and Transferred (TX) bytes while exchanging data with this peer.

[[Category:{{{name}}} Status section (legacy)]]