Template:Networking rutx first start login

From Teltonika Networks Wiki
This is the approved revision of this page, as well as being the most recent.
  1. To enter the router's Web interface (WebUI), type http://{{{ip}}} into the URL field of your Internet browser.
  2. Use login information shown in image A when prompted for authentication.
  3. After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory, and you will not be able to interact with the router's WebUI before you change the password.
  4. When you change the router's password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router's main operating parameters.
  5. Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.

[[File:{{{file_login_a}}}]] [[File:{{{file_login_b}}}]]