UPNP

From Teltonika Networks Wiki
This is the approved revision of this page; it is not the most recent. View the most recent revision.

Summary

UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers

General Settings

Services upnp general.PNG

field name value description
Enable yes | no; Default: no Toggles UPnP ON or OFF
Use secure mode yes | no; Default: yes Toggles Secure mode ON or OFF

Advanced Settings

Services upnp advanced.PNG

field name value description
Use UPnP port mapping yes | no; Default: yes Toggles UPnP port napping ON or OFF
Use NAT-PMP port mapping yes | no; Default: yes Toggles NAT-PMP port mapping ON or OFF
Device UUID yes | no; Default: yes Specify Universal unique ID of the device

UPnP ACLs

ACLs specify which external ports may be redirected to which internal addresses and ports

Services upnp acls.PNG

field name value description
Comment string; Default: Allow high ports Adds a comment to this rule
Ecternal ports integer [0..65535]] | range of integers [0-65535]; Default: 1024-65535 External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Internal Addresses ip/integer [0..32]; Default: 0.0.0.0/0 Internal address to be redirect to
Internal ports integer [0..65535]] | range of integers [0-655355]; Default: 1024-65535 Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Action allow | deny; Default: allow Allows or forbids the UPnP service to open the specified port