RUT240 Services (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 13:41, 18 November 2021 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT240 Services (legacy WebUI) to RUT240 Services (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT240 > RUT240 Manual > RUT240 Legacy WebUI > RUT240 Status section (legacy) > RUT240 Services (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.5.

Note: this user manual page is for RUT240's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary[edit source]

The Services page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.

This chapter of the user manual provides an overview of the Services page for RUT240 devices.

Services[edit source]

The Services page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.

The figure below is an example of the Services page:

Networking rut240 manual services.png

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes: