Difference between revisions of "TRB140 WAN"

From Teltonika Networks Wiki
Line 2: Line 2:
 
<!---------DEVICE DETAILS--------->
 
<!---------DEVICE DETAILS--------->
 
| name  = TRB140
 
| name  = TRB140
| series = TRB14X
+
| series = TRB1
 
<!-----------SEPARATORS----------->
 
<!-----------SEPARATORS----------->
 
| modem  = 1
 
| modem  = 1
 
| eth    = 0
 
| eth    = 0
 
}}
 
}}

Revision as of 07:42, 18 August 2020

Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 WebUI > TRB140 Network section > TRB140 WAN

The information in this page is updated in accordance with firmware version TRB1_R_00.07.01.


Summary

The WAN page is used to to set up WAN network interfaces, which are used to connect device with external networks.

This manual page provides an overview of the WAN windows in TRB140 devices.

WAN

The WAN section displays WAN network interfaces currently existing on this device.

[[File:Networking_rutos_manual_wan_mobile_{{{mobile}}}_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}_wired_{{{wired}}}.png|border|class=tlt-border]]

From here you can turn the interfaces on or off, change their priority* or enter an interface's configuration page.


* You can change the priority by dragging and dropping an interface to another position. Moving an interface changes its metric value in the configuration file. Interfaces that are higher on the list have greater priority.

Interface configuration

This section provides information on WAN interface configuration. There is one type of WAN interface on the device:

To begin configuring an interface, click the 'Edit' button on the right side of the interface: