Template:Networking device manual spatial measurements 3d

From Teltonika Networks Wiki

3D view

You can inspect the device's 3D model by downloading one of the following 3D files:

  • [[Media:{{{3d_pdf}}}|3D .pdf file]]
  • [[Media:{{{3d_step}}}|3D .step file]]


To view and interact with PDF 3D file please follow these steps:

  • Download the file to yours computer
  • Open file with PDF viewing program, for this overview Adobe Acrobat Reader DC version 2020.012.20043 was used. Do not use yours browser to open the file, because you will see only blank page
  • Likely 3D content will be disabled by default, so you will see blank page with informational warning at the top, click on options and choose either to trust the document once or always, choose one according to yours preference
  • File:Networking opening 3d models adobe warning.png

  • Now you should be able to see and interact with 3D model, for easier navigation please click right mouse button and select Show Model Tree and on left side you should see a list with all parts where you can pick and choose what you want to be displayed on yours screen
  • If Warning message was not displayed please try the following:
    1. Go to Edit > Preferences > 3D & Multimedia and then select the Enable playing 3D content checkbox (for Adobe Acrobat Reader).
    2. If you cannot locate 3D content options, please update yours software version

    If you followed these steps and yours application version is sufficient you should be able to fully interact with 3D model of yours device, invluding hiding, rotating, isolating and measuring each separate component and whole model.