Template:Regulation 118 ece standards
From Teltonika Networks Wiki
Revision as of 11:50, 21 September 2018 by Dziugas
The device in question and its components were considered under the following:
|External case of RUT955||Material: Aluminium with ABS+PC panel |
In accordance with Reg. ECE points 184.108.40.206 and 220.127.116.11 it is not necessary to submit this component to the tests in the Annexes VI, VII and VIII*.
|External connectors||The above told connectors are fabricated in plastic material and metal. |
Their surface and volume does not exceed respectively the are of 300 cm2 or 120 cm2, considering the most onerous condition foreseen by Reg. 118 ECE (point 18.104.22.168.2).
|Miscellaneous internal components||Inside the router parts of electrical/electronic components are contained. It is premised that in any case the shape/dimensions of such components do not allow the extraction of samples in the dimensions prescribed by Annex VI para. 3.1 and Annex para. 3 (see Reg. 118 ECE point 22.214.171.124). |
Moreover these parts are completely contained in the metallic/plastic case and therefore they are not exposed to any source of flame and/or irradiance.
- Annex 6 - Test to determine the horizontal burning rate of materials
- Annex 7 - Test to determine the melting behaviour of materials
- Annex 8 - Test to determine the vertical burning rate of materials