View source for RMS Device configuration


=Device configuration=
==Summary==
This tool will help you to configure multiple devices and even ones from different series.



To use it, in '''[[RMS Management|Management]] -> [[RMS Devices|Devices]]''' , select the devices you'd like to configure, then, under the [[RMS Configuration menu|Configuration]] submenu click '''Device configuration''' 

Devices you're trying to configure must be '''Online''' (<span style="color:#6CAF8F">⬤</span>), otherwise, the '''Device configuration''' option will be grayed out.

<big>'''<span style="color:#ff0000">Disclaimer</span>'''</big>
*This tool is only available to use on devices with Firmware [[FW & SDK Downloads|'''07.03''']] and up. 
*Also, devices you're going to configure must be on the same version of the firmware: e.g. RUTX_R_00.'''07.03.2''' and RUT9_R_00.'''07.03.2''' can be while RUTX_R_00.'''07.03''' RUTX_R_00.'''07.03.2''' can not be configured simultaneously.

<big>'''<span style="color:#ff0000">Disclaimer</span>'''</big>

This feature is in '''beta''' stage.
==Overview==
[[File:Rmsmulticonfig1.png|border|class=tlt-border|1100px]]

1. Here, you have 2 functions: 
*[[File:Rmsmulticonfig2.png|24x24px]] will list all existing configuration templates
*[[File:Rmsmulticonfig3.png|24x24px]] will save your just configured endpoints into a '''template''' for future use.

2. Will save any made changes into the selected devices.

==Update==
Here, you'll have an option to parse current configuration of the desired section and then update the configuration based on your needs.

Example: We are going to get our current Wi-Fi general configuration:
*Firstly, we navigate to it in section list - '''Network -> Wireless -> Devices'''. Then find general setup.
*Most sections are collapsed, therefore press an arrow on the right side to expand the section:

[[File:Rmsmulticonfig5.png|border|class=tlt-border|400px]]

#Now when you've expanded all endpoints, press <big>'''<span style="color:#0455a4">Get Devices Configuration From Device</span>'''</big>
#This will parse all information of this specific configuration in the device and fill in the form below.
[[File:Rmsmulticonfig4.png|border|class=tlt-border|1100px]]
If you've selected more than one device, you will get to choose which device's configuration to parse:

[[File:Rmsmulticonfig8.png|border|class=tlt-border|300px]]

*After pressing the button you should get this message that the action was successful:

[[File:Rmsmulticonfig6.png|400px]]

*Additionally, this action you've just made will also reflect in the changes list:

[[File:Rmsmulticonfig7.png|300px]]
<br>


----
There can also be situations where you'd need to specify which section's configuration to parse exactly, as there may be more than one configuration on specific section.

Example: You'd like to parse and change the configurations of multiple Network Interfaces.

[[File:Rmsmulticonfig17.png|border|class=tlt-border|500px]]

After pressing <big>'''<span style="color:#0455a4">+ ADD</span>'''</big> button, you will get more Update forms:

[[File:Rmsmulticonfig18.png|border|class=tlt-border|500px]]
==Create==
Here, you'll have the option to create an entirely new configuration in a selected section.

#Let's find '''Create''' section on our wireless devices.<br>[[File:Rmsmulticonfig10.png|border|class=tlt-border|900px]]
#Now we need to fill out all fields that we would like for our new AP to have.<br>[[File:Rmsmulticonfig9.png|border|class=tlt-border|900px]]
#Here we're creating new Wi-Fi AP on RUT240 and RUT955 and as their Wi-Fi functionality is the same, pushing new configuration onto devices is successful.<br>[[File:Rmsmulticonfig11.png|border|class=tlt-border|500px]]

*<big>'''<span style="color:#ff0000">Note</span>'''</big>: if you're configuring some functionality that the selected device does not have, and save it onto device, you'll get this message instead:

[[File:Rmsmulticonfig12.png|border|class=tlt-border|500px]]
[[Category:RMS_Configuration_menu]]

==Manage configurations==
You can not only save your configuration onto the devices but in the RMS too.
#Make any changes that you'd like to have in your configuration template and click on [[File:Rmsmulticonfig3.png|24x24px]] icon.
#A window will appear asking if you'd like to save this configuration to template. <br>[[File:Rmsmulticonfig13.png|border|class=tlt-border|700px]]
#To see all of your saved click on the [[File:Rmsmulticonfig2.png|24x24px]] icon.
#A window will appear showing all your saved configurations:<br>[[File:Rmsmulticonfig14.png|border|class=tlt-border|700px]]
##[[File:Rmsmulticonfig15.png|24x24px]] will let you apply the saved configuration on top of the current one. If the same configurations have been modified already using the same endpoint, applying changes from a template will overwrite them.
##[[File:Rmsmulticonfig16.png|24x24px]] will remove the selected configuration template.