75
edits
Changes
Extending Router Hotspot Network with TAP100 (view source)
Revision as of 09:59, 25 October 2023
, 09:59, 25 October 2023no edit summary
<li> Teltonika Networks router with WiFi capabilities </li>
<li> Teltonika Networks router with WiFi capabilities </li>
<li> Teltonika Networks wireless AP TAP100 connected to the LAN port of the Router </li>
<li> Teltonika Networks wireless AP TAP100 connected to the LAN port of the Router </li>
<li> Two end devices (PC, Laptop, Smartphone) </li>
<li> Preferably two end devices (PC, Laptop, Smartphone) </li>
<li> RMS account (useful to have) </li>
<li> RMS account (useful to have) </li>
</ul>
</ul>
<li>IpV4 address : specify any private IP address. Make sure that this address will not be used for hotspot or any other instances. We are gonna choose 192.168.10.1 </li>
<li>IpV4 address : specify any private IP address. Make sure that this address will not be used for hotspot or any other instances. We are gonna choose 192.168.10.1 </li>
<li>Netmask : default can be left (255.255.255.0) </li>
<li>Netmask : default can be left (255.255.255.0) </li>
[[File:Management port updt.png|border|class=tlt-border]]
[[File:VLAN MANAGEMENT HOTSPOT2.png|border|class=tlt-border]]
<li>In pop-up window navigate to physical settings and for interface choose eth0.3. If your newly created VLAN ID is left by default as 3, you have to choose eth0.3, but if you specify some other VLAN ID, for example VLAN 55, you will need to choose eth0.55 </li>
<li>In pop-up window navigate to physical settings and for interface choose eth0.3. If your newly created VLAN ID is left by default as 3, you have to choose eth0.3, but if you specify some other VLAN ID, for example VLAN 55, you will need to choose eth0.55 </li>
[[File:VLAN MANAGEMENT HOTSPOT3.png|border|class=tlt-border]]
[[File:VLAN MANAGEMENT HOTSPOT3.png|border|class=tlt-border]]