Cobot.me Hotspot Configuration on RutOS firmware: Difference between revisions

Latest revision as of 13:27, 17 October 2024

Main Page > IoT Platforms > IoT > Cobot.me Hotspot Configuration on RutOS firmware

The information in this page is updated in accordance with 00.07.10 firmware version.

Summary

This chapter is a guide on configuring cobot.me radius service to work with Teltonika router's hotspot.

Step 1: cobot.me configuration

Login

First, go to cobot.me and log into your account (LOG IN in the top right corner). If you don't have a registered account, then you will need to create one - click Try Cobot.

Sign Up

After clicking Try Cobot you will be redirected to the registration page. Enter you account information and click Next.

Next step is to enter further information of your account. After entering it click Add Space.

Set Up new radius server

In the opened window click SETUP icon, then - Wifi Integration. You will be prompted to Radius Wifi Integration window. Click the Start Free Trial.

Network details

You will be given your Radius server configuration data that you will need in the next step.

Add Wifi Guest Accounts

Click Wifi Guest Accounts in the bottom of the page to add accounts to let users access your WiFi.

Type user account information and click Add Account.

At the bottom of the page you can see all your created users.

Step 2: Router configuration

If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button which is located at the top-right corner of the WebUI.

In order to start our Hotspot, we need to create a Wifi access point without a dedicated interface nor with any authentication:

Navigate to Network → Wireless and click add
In General setup section:

Select "--No network--".

Select "No encryption" in Wireless security → Encryption
Save & Apply

Navigate to Services → Hotspot (Or install the package if it is not present by navigating to Services → Package Manager)
Add new Hotspot instance by selecting Wireless access point created earlier

Enable the Hotspot and select Radius as Authentication mode in General settings.

Go to Radius menu and enter cobot.me radius information. In this example:

Disable Require Message-Authenticator option.
RADIUS Servers - 130.211.107.8, 130.211.56.175;
Authentication port - 26945;
Radius secret key

Then Save & Apply configuration.

Our configuration is complete.

Test your Hotspot

Try connecting to your router using a computer or mobile phone.

Select the newly created hotspot;
After a successful connection, visit any website, and you will be redirected to the hotspot login page. Type your username and password;
Click Login;
You should see a message Authorization Successful;

@@ Line 1: / Line 1: @@
+ <p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.10'''] firmware version.</p>
 ==Summary==
-This chapter is a guide on configuring cobot.me provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices.
+This chapter is a guide on configuring cobot.me radius service to work with Teltonika router's hotspot.
 ==Step 1: cobot.me configuration ==
-If you're having trouble finding this page or some of the parameters described here on your cobot account, you should turn on '''"Admin" mode'''. You can do that by clicking the "'''Admin'''" button at the top-right corner of the cobot website.
-[[File:Cobotme.gif|border|center]]
 ===Login===
 ----
 First, go to '''cobot.me''' and log into your account ('''LOG IN''' in the top right corner). If you don't have a registered account, then you will need to create one - click '''Try Cobot'''.
-[[File:Cobotmain.png|border|center|1009x1009px]]
+[[File:Cobotmain.png|border|center|class=tlt-border|1009x1009px]]
 ====Sign Up====
 After clicking '''Try Cobot''' you will be redirected to the registration page. Enter you account information and click '''Next'''.
-[[File:Cobotsignup3.png|border|center]]
+[[File:Cobotsignup3.png|border|border|center|class=tlt-border]]
 Next step is to enter further information of your account. After entering it click '''Add Space'''.
-[[File:Cobotsignup5.png|center]]
+[[File:Cobotsignup5.png|border|center|class=tlt-border]]
 ===Set Up new radius server===
 ----
-In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window. Click the '''Set up Radius Server.'''
+In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window. Click the '''Start Free Trial'''.
-[[File:Imagea.png|border|center]]
+[[File:Cobot wifi integrationv1.png|border|center|class=tlt-border]]
 ===Network details===
+----
 You will be given your Radius server configuration data that you will need in the next step.
-[[File:Radiuscobot.png|border|center|1150x1150px]]
+[[File:Radiuscobotv1.png|border|center|class=tlt-border|1150x1150px]]
 ===Add Wifi Guest Accounts===
+----
 Click '''Wifi Guest Accounts''' in the bottom of the page to add accounts to let users access your WiFi.
-[[File:Cobotwifi.png|border|center|1098x1098px]]
+[[File:Cobotwifiv1.png|border|center|class=tlt-border|600px]]
 Type user account information and click '''Add Account'''.
-[[File:Wifisuers.png|border|center|1095x1095px]]
+[[File:Wifisuersv1.png|border|center|class=tlt-border|600px]]
 At the bottom of the page you can see all your created users.
-[[File:Accounts.png|border|center]]
+[[File:Accountsv1.png|border|center|class=tlt-border]]
 ==Step 2: Router configuration ==
-If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
+If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI"''' mode. You can do that by clicking the '''"Advanced"''' button which is located at the top-right corner of the WebUI.
-[[File:Networking rutx manual webui basic advanced mode.gif|border|center]]
+[[File:Networking rutos manual webui basic advanced mode 75.gif|border|class=tlt-border|1004x1004px]]
-===Creating wireless access point===
-If you have already set up your wireless access point - skip this step.
-* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
-* Go to the '''Network → Wireless''' page.
-* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.
-[[File:Wifirut.png|border|center]]
-Edit your new Access Point as below:
-# Check '''Enable;'''
-# Mode - '''Access Point''';
-# ESSID - Your desired Extended Service Set Identifier name;
-# Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
-[[File:APconfig1.png|border|center]]
-Navigate to '''Wireless Security''' tab and choose your '''Encryption''' method '''(1)'''. When you are done, click '''Save & Apply (2)'''.
-[[File:APsecu.png|border|center]]
-===Set up hotspot===
-Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
-[[File:Hotspota.png|border|center]]
-'''Hotspot configuration'''
+In order to start our Hotspot, we need to create a Wifi access point without a dedicated interface nor with any authentication:
+* Navigate to Network → Wireless and click add
+* In General setup section:
+#Select "'''--No network--'''".
+[[File:Networking Radius server wireless general v2.png|border|class=tlt-border|1050x1050px]]
+#Select "No encryption" in Wireless security → Encryption
+#Save & Apply
+[[File:Networking Radius server wireless security v2.png|border|class=tlt-border|1088x1088px]]
-In the '''General tab''' do the following steps:
+* Navigate to Services → Hotspot (Or install the package if it is not present by navigating to Services → Package Manager)
+* Add new Hotspot instance by selecting Wireless access point created earlier
+[[File:Networking Radius server hotspot general part1 v1.png|border|1100px|class=tlt-border]]
+* Enable the Hotspot and select Radius as Authentication mode in General settings.
+[[File:Networking Radius server hotspot general v2.png|border|class=tlt-border|692x692px]]
+* Go to Radius menu and enter cobot.me radius information. In this example:
+# '''Disable''' Require Message-Authenticator option.
+# '''RADIUS Servers''' - 130.211.107.8, 130.211.56.175;
+# '''Authentication port''' - 26945;
+# '''Radius secret key'''
+Then '''Save & Apply''' configuration.
-# Check '''Enable;'''
+[[File:Cobotradiussettingsv2.png|border|class=tlt-border|730x730px]]
-# Authentication mode - '''Radius'''.
-[[File:Hotspotgentab.png|border|center]]
+Our configuration is complete.
-Then go to '''Radius''' tab and enter the Radius server configuration details from cobot:
-# '''RADIUS Servers''' - 130.211.138.166, 104.198.250.153;
-# '''Authentication port''' - 13143;
-# '''Radius secret key''' - 4L1pnC5jMIlfZH2T;
-# '''Save & Apply'''.
-[[File:Hotspotconfiga.png|border|center|1258x1258px]]
 ==Test your Hotspot==
@@ Line 98: / Line 76: @@
 * You should see a message '''Authorization Successful;'''
-[[File:Phonehostpotccobot.png|border|center]]
+[[File:Phonehostpotccobotv1.png|1000px|border|center|class=tlt-border]]
 ==See also==
 http://www.cobot.me
+[[Cobot.me Hotspot Configuration on Legacy firmware]]
 [[Category:IoT]]