18
edits
Changes
Mobile Bridge mode troubleshooting (view source)
Revision as of 09:16, 18 June 2020
, 09:16, 18 June 2020no edit summary
* Wait about 5min., that RUT fully boots up in '''Bridge mode''', then re-enable PC network interface or reboot your PC.
* Wait about 5min., that RUT fully boots up in '''Bridge mode''', then re-enable PC network interface or reboot your PC.
'''Note:'''using Bridge mode will disable most of the router’s other capabilities (NAT, Firewall, DHCP server...) and router will not have internet, will not be accessible through the RMS platform.
'''Note:''' using Bridge mode will disable most of the router’s other capabilities (NAT, Firewall, DHCP server...) and router will not have internet, will not be accessible through the RMS platform.
----
----
* Reboot RUT device. Wait about 5min., that router fully boots up in Bridge mode.
* Reboot RUT device. Wait about 5min., that router fully boots up in Bridge mode.
* After RUT is booted in Bridge mode, re-enable PC network interface or reboot your PC.
* After RUT is booted in Bridge mode, re-enable PC network interface or reboot your PC.
[[Category:Troubleshooting & Recovery]]