Difference between revisions of "RUTX50 WebUI"
From Teltonika Networks Wiki
Gytispieze (talk | contribs) |
|||
(15 intermediate revisions by 4 users not shown) | |||
Line 7: | Line 7: | ||
| network = 1 | | network = 1 | ||
| routes = 1 | | routes = 1 | ||
− | |||
| services = 1 | | services = 1 | ||
| r_graphs = 1 | | r_graphs = 1 | ||
+ | | mob_usage = 1 | ||
+ | | logs = 1 | ||
<!----------- NETWORK SECTION -----------> | <!----------- NETWORK SECTION -----------> | ||
− | | mobile | + | | mobile = 1 |
− | | wan | + | | wan = 1 |
− | | lan | + | | lan = 1 |
− | | | + | | interfaces = 1 |
− | | | + | | dns = 1 |
− | + | | wireless = 1 | |
− | | | + | | vlan = 1 |
− | | vlan | + | | failover = 1 |
− | | | + | | firewall = 1 |
− | | | + | | routing = 1 |
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<!----------- SERVICES SECTION -----------> | <!----------- SERVICES SECTION -----------> | ||
+ | | package_manager = 1 | ||
| cloud_solutions = 1 | | cloud_solutions = 1 | ||
− | | | + | | vpn = 1 |
− | |||
| mobile_utilities = 1 | | mobile_utilities = 1 | ||
− | | | + | | auto_reboot = 1 |
+ | | rs232 = 0 | ||
+ | | rs485 = 0 | ||
+ | | console = 0 | ||
+ | | modbus = 1 | ||
| dnp3 = 1 | | dnp3 = 1 | ||
| input_output = 1 | | input_output = 1 | ||
− | |||
| gps = 1 | | gps = 1 | ||
+ | | bluetooth = 1 | ||
+ | | data_to_server = 1 | ||
+ | | events_reporting = 1 | ||
+ | | traffic_logging = 1 | ||
+ | | usb_tools = 1 | ||
| hotspot = 1 | | hotspot = 1 | ||
− | | | + | | hotspot2 = 1 |
− | |||
− | |||
− | |||
| web_filter = 1 | | web_filter = 1 | ||
− | |||
| dynamic_dns = 1 | | dynamic_dns = 1 | ||
− | | | + | | traffic_shaping = 1 |
− | |||
| mqtt = 1 | | mqtt = 1 | ||
| snmp = 1 | | snmp = 1 | ||
+ | | tr-069 = 1 | ||
+ | | ntp = 1 | ||
+ | | upnp = 1 | ||
| wake_on_lan = 1 | | wake_on_lan = 1 | ||
− | | | + | | vrrp = 1 |
− | | | + | | sshfs = 1 |
− | |||
− | |||
− | |||
<!----------- SYSTEM SECTION -----------> | <!----------- SYSTEM SECTION -----------> | ||
| administration = 1 | | administration = 1 | ||
− | | | + | | users = 1 |
− | | | + | | setup_wizard = 1 |
| firmware = 1 | | firmware = 1 | ||
− | | | + | | backup = 1 |
− | | | + | | cli = 1 |
− | | | + | | custom_scripts = 1 |
+ | | speedtest = 1 | ||
+ | | profiles = 1 | ||
| reboot = 1 | | reboot = 1 | ||
}} | }} |
Revision as of 10:56, 5 September 2022
Main Page > RUTX Routers > RUTX50 > RUTX50 Manual > RUTX50 WebUINote: For WebUI supported browsers please see Supported browsers (RutOS).
This page contains links with descriptions of all WebUI windows of RUTX50. If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
WebUI
Status | Network | Services | System |
---|---|---|---|