Teltonika Networks Wiki

Changes

Modbus TCP Slave Send SMS example (view source)

Revision as of 15:44, 24 January 2023

419 bytes added ,  15:44, 24 January 2023
no edit summary
Line 1: Line 1:  
==Introduction==
 
==Introduction==
   −
<span style="color: red;">The information on this page is updated in accordance with firmware version <span style="color: #0054A6;"><b>00.07.03.2</b></span>.</span>
+
<p style="color:red">The information on this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.03.2'''] firmware version. .</p>  
    
'''Modbus''' is a serial communications protocol. Simple and robust, it has become a de facto standard communication protocol and is now a commonly available means of connecting industrial electronic devices.
 
'''Modbus''' is a serial communications protocol. Simple and robust, it has become a de facto standard communication protocol and is now a commonly available means of connecting industrial electronic devices.
Line 20: Line 20:     
Firstly, we will configure '''Modbus TCP Slave''' on the router and then on the same device we will configure '''Modbus TCP Master''' in order to send Modbus requests to the same device.
 
Firstly, we will configure '''Modbus TCP Slave''' on the router and then on the same device we will configure '''Modbus TCP Master''' in order to send Modbus requests to the same device.
 +
----
 +
===Configuring Modbus TCP Slave===
 +
 +
In order to start our configuration you will need to open your device's WebUI (by entering the device's IP address of your device), then navigate to '''Services → Modbus → Modbus TCP Slave'''.
 +
 +
In order to configure Modbus TCP Slave follow the steps provided below:
 +
 +
[[File:Networking rut configuration modbus tcp slave v1.gif|border|class=tlt-border]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/102170"