RUT200 WebUI: Difference between revisions
No edit summary |
No edit summary |
||
| Line 21: | Line 21: | ||
| vlan = 1 | | vlan = 1 | ||
| routing = 1 | | routing = 1 | ||
| igmp_proxy = 1 | |||
| traffic_shaping = 1 | |||
| ports = 1 | | ports = 1 | ||
| dhcp = 1 | | dhcp = 1 | ||
| Line 40: | Line 42: | ||
| input_output = 1 | | input_output = 1 | ||
| gps = 0 | | gps = 0 | ||
| bluetooth = 0 | | bluetooth = 0 | ||
| data_to_server = 1 | | data_to_server = 1 | ||
| Line 50: | Line 51: | ||
| web_filter = 1 | | web_filter = 1 | ||
| dynamic_dns = 1 | | dynamic_dns = 1 | ||
| mqtt = 1 | | mqtt = 1 | ||
| snmp = 1 | | snmp = 1 | ||
Revision as of 13:35, 19 October 2023
Main Page > RUT Routers > RUT200 > RUT200 Manual > RUT200 WebUINote: For WebUI supported browsers please see Supported browsers (RutOS).
This page contains links with descriptions of all WebUI windows of RUT200. If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
WebUI
| Status | Network | Services | System |
|---|---|---|---|