RUT240 WebUI: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 1: Line 1:
{{Template: Networking_device_manual_webui
{{Template: Networking_rutxxx_manual_webui
<!-- STATUS SECTION -->
<!-- STATUS SECTION -->
| name          = RUT240
| name          = RUT240
Line 10: Line 10:
| graphs        = 1
| graphs        = 1
| mobile_traffic = 1
| mobile_traffic = 1
| system_log    = 0
| kernel_log    = 0
| events_log    = 1
| events_log    = 1
<!-- NETWORK SECTION -->
<!-- NETWORK SECTION -->
Line 23: Line 21:
| load_balancing = 1
| load_balancing = 1
<!-- SERVICES SECTION -->
<!-- SERVICES SECTION -->
| vrrp         = 1
| vrrp           = 1
| tr_069       = 0
| tr_069         = 0
| web_filter   = 1
| web_filter     = 1
| mqtt         = 0
| mqtt           = 1
| ntp           = 1
| ntp           = 1
| rs232_rs485   = 0
| rs232_rs485   = 0
| vpn           = 1
| vpn           = 1
| dynamic_dns   = 1
| dynamic_dns   = 1
| sms_utilities = 1
| sms_utilities = 1
| snmp          = 1
| sms_gateway    = 1
| sms_gateway  = 1
| snmp          = 1
| gps           = 0
| gps           = 0
| hotspot      = 1
| wake_on_lan    = 1
| wake_on_lan    = 1
| cli          = 1
| hotspot        = 1
| auto_reboot  = 1
| cli            = 1
| usb_tools    = 0
| auto_reboot    = 1
| modbus       = 1
| modbus         = 1
| upnp          = 0
| usb_tools      = 0
| qos           = 1
| upnp           = 1
| input_output  = 1
| qos            = 1
| rs232        = 0
| input_output  = 1
| rs485        = 0
<!-- SYSTEM SECTION -->
<!-- SYSTEM SECTION -->
| setup_wizard  = 1
| setup_wizard  = 1
Line 51: Line 47:
| administration = 1
| administration = 1
| user_scripts  = 1
| user_scripts  = 1
| restore_point  = 1
| firmware      = 1
| firmware      = 1
| flash_firmware = 0
| restore_point  = 0
| licenses      = 1
| licenses      = 1
| reboot        = 1
| reboot        = 1
}}
}}

Revision as of 14:42, 11 June 2019

Main Page > EOL Products > RUT240 > RUT240 Manual > RUT240 WebUI