TSW212 Remote Monitoring & Administration
TSW212 supports multiple monitoring and administration possibilities.
Remote control options
The TSW212 router supports the following remote control capabilities:
| Remote control method | Can get parameters | Can set parameters |
|---|---|---|
| RMS |  |
|
| SSH | |
|
| HTTP | |
|
| JSON | |
|
| SNMP | |
 |
RMS
The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.
RMS access can be configured from the System → Administration → RMS page.
Public IP
If your device has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.
HTTP access
Remote HTTP access can be set up via the System → Administration → Access Control page.
SSH access
Remote SSH access can be set up via the System → Administration → Access Control page.
JSON-RPC
JSON-RPC access can be set up via the System → Administration → Access Control page. Note: As of RUTOS firmware version 7.0 and higher, it is enabled by default.
SNMP
Simple Network Management Protocol (SNMP) is a protocol for network management, used for collecting information from network devices. For more information on SNMP in TSW212, visit the SNMP manual page.