TSW212 Remote Monitoring & Administration

From Teltonika Networks Wiki
Main Page > TSW Switches > TSW212 > TSW212 Manual > TSW212 Remote Monitoring & Administration

TSW212 supports multiple monitoring and administration possibilities.

Remote control options

The TSW212 router supports the following remote control capabilities:

Remote control method Can get parameters Can set parameters
RMS Check.png Check.png
SSH Check.png Check.png
HTTP Check.png Check.png
SNMP Check.png Uncheck.png

RMS


The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the SystemAdministrationRMS page.

Public IP


If your device has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access


Remote HTTP access can be set up via the SystemAdministrationAccess Control page.

SSH access


Remote SSH access can be set up via the SystemAdministrationAccess Control page.



SNMP


Simple Network Management Protocol (SNMP) is a protocol for network management, used for collecting information from network devices. For more information on SNMP in TSW212, visit the SNMP manual page.