Line 26: |
Line 26: |
| | | |
| | | |
− | '''TCP MASTER CONFIGURATION'''
| + | ===TCP MASTER CONFIGURATION=== |
| | | |
| On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests. | | On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests. |
Line 32: |
Line 32: |
| [[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]] | | [[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]] |
| | | |
− | | + | ===REQUESTS CONFIGURATION=== |
− | '''Requests Configuration'''
| |
| | | |
| To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master. | | To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master. |
Line 40: |
Line 39: |
| | | |
| [[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]] | | [[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]] |
− |
| |
| | | |
| Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter. | | Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter. |
Line 49: |
Line 47: |
| TCP MASTER should look like this. | | TCP MASTER should look like this. |
| [[File:Networking rux11 example DNP3 tcp master configurdv1.png|border|class=tlt-border]] | | [[File:Networking rux11 example DNP3 tcp master configurdv1.png|border|class=tlt-border]] |
− |
| |
| | | |
| ==DNP3 OUTSTATION== | | ==DNP3 OUTSTATION== |
Line 57: |
Line 54: |
| To configure the DNP3 Outstation Go to Services> DNP3> DNP3 OUTSTATION | | To configure the DNP3 Outstation Go to Services> DNP3> DNP3 OUTSTATION |
| | | |
− | '''DNP3 OUTSTATION CONFIGURATION'''
| + | ===DNP3 OUTSTATION CONFIGURATION=== |
| [[File:Networking rutx11 example DNP3 dnp3 outstation configuration v1.png|border|class=tlt-border]] | | [[File:Networking rutx11 example DNP3 dnp3 outstation configuration v1.png|border|class=tlt-border]] |
| | | |
Line 72: |
Line 69: |
| [[File:Networking rutx11 example DNP3 dnp3testing endpoint v1.png|border|class=tlt-border]] | | [[File:Networking rutx11 example DNP3 dnp3testing endpoint v1.png|border|class=tlt-border]] |
| | | |
− | DATA TO SERVER | + | ===DATA TO SERVER=== |
| | | |
| Navigate to Services> Data to Server and set up the server. | | Navigate to Services> Data to Server and set up the server. |