Changes

DNP3 TCP Master (view source)

Revision as of 10:53, 27 June 2022

3 bytes added ,  10:53, 27 June 2022
no edit summary
Line 26: Line 26:       −
'''TCP MASTER CONFIGURATION'''
+
===TCP MASTER CONFIGURATION===
    
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
 
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
Line 32: Line 32:  
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
 
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
   −
 
+
===REQUESTS CONFIGURATION===
−
'''Requests Configuration'''
      
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
 
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
Line 40: Line 39:     
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
 
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
−
      
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
 
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
Line 49: Line 47:  
TCP MASTER should look like this.
 
TCP MASTER should look like this.
 
[[File:Networking rux11 example DNP3 tcp master configurdv1.png|border|class=tlt-border]]
 
[[File:Networking rux11 example DNP3 tcp master configurdv1.png|border|class=tlt-border]]
−
      
==DNP3 OUTSTATION==
 
==DNP3 OUTSTATION==
Line 57: Line 54:  
To configure the DNP3 Outstation Go to Services> DNP3> DNP3 OUTSTATION
 
To configure the DNP3 Outstation Go to Services> DNP3> DNP3 OUTSTATION
   −
'''DNP3 OUTSTATION CONFIGURATION'''
+
===DNP3 OUTSTATION CONFIGURATION===
 
[[File:Networking rutx11 example DNP3 dnp3 outstation configuration v1.png|border|class=tlt-border]]
 
[[File:Networking rutx11 example DNP3 dnp3 outstation configuration v1.png|border|class=tlt-border]]
   Line 72: Line 69:  
[[File:Networking rutx11 example DNP3 dnp3testing endpoint v1.png|border|class=tlt-border]]
 
[[File:Networking rutx11 example DNP3 dnp3testing endpoint v1.png|border|class=tlt-border]]
   −
DATA TO SERVER
+
===DATA TO SERVER===
    
Navigate to Services> Data to Server and set up the server.
 
Navigate to Services> Data to Server and set up the server.
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/92622"

Navigation menu