Product change notifications (PCN) is a way of informing customers of upcoming changes related to Teltonika Networks products. This includes outward appearance adjustments, hardware improvements, changes to package contents, etc. Changes related to a product's firmware are not included in PCNs (click here to see the firmware changelog).
This page stores information regarding changes to the RUT241 device. Below you will find a list of both upcoming and already implemented changes sorted by newest to oldest (top to bottom).
2025.08.12: eSIM Bootstrap capability
Starting from 2026 Q1, RUT241 eSIM will include a bootstrap profile, which enables the download of an initial operational eSIM profile without requiring an additional internet connection.
Change Notification!
As of 2025-11-24 an additional revision has been made to this PCN document: previous change date of 2025 Q4 was revised an is now 2026 Q1
As of 2025-09-03, a revision has been made to this PCN document: clarification added that Bootstrap functionality is officially supported from firmware version RUT2M_R_00.07.17.2 or newer.
PCN Number: PCN_RUT241_esim_bootstrap_2025.08.12
Change description
Change type
eSIM service enhancement
Detailed description
• Addition of bootstrap profile to eSIM
• Automated SIM switching functionality when no physical SIM is present and bootstrap profile is active
• Device with active bootstrap profile will have access only to RMS (Remote Management System) with limited functionality and SM-DP server for downloading operational profile
• Bootstrap profile has a 10 MB mobile data limit
• Bootstrap profile is valid for 1 year, starting from the manufacturing date of the device
Read the following eSIM Bootstrap guide to familiarize yourself with the functionality.
Boostrap functionality is officially supported from firmware version RUT2M_R_00.07.17.2 or newer.
Change reasons
Simplified eSIM activation process and improved provisioning automation
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 2*****
No changes
Upcoming change date
2026 Q1
Change impact
Risk assessment
• Device initial provisioning workflows may require review or adjustment to account for the presence of a bootstrap profile
• Installation procedures or automated deployment tools may need to be updated if they rely on predefined SIM behavior
• Automatic SIM switching will be enabled only on devices shipped with a pre-installed bootstrap profile — existing devices with eSIM but no bootstrap profile will not exhibit any behavioral changes
• Devices manufactured over 12 months prior to activation may be unable to use the bootstrap profile due to expiration
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. Learn more eSIM Bootstrap. For more detailed information, please contact your sales representative.
Supported country list
EMEA
APAC
AMERICAS
Territories / Special Regions
Albania
Austria
Belgium
Bulgaria
China
Brazil
Gibraltar
Croatia
Cyprus
Czech Republic
Denmark
Hong Kong
Canada
Guadeloupe
Estonia
Finland
France
Georgia
India
Colombia
Northern Mariana Islands
Germany
Greece
Hungary
Iceland
Indonesia
Costa Rica
Réunion
Ireland
Italy
Latvia
Liechtenstein
Malaysia
Mexico
Lithuania
Luxembourg
Malta
Montenegro
Singapore
United States of America
Netherlands
Norway
Poland
Portugal
Sri Lanka
Romania
Slovakia
Slovenia
South Africa
Taiwan
Spain
Sweden
Switzerland
United Kingdom
Vietnam
Egypt
Saudi Arabia
Kuwait
Qatar
Australia
Turkey
Tunisia
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the PDF version of this notification, click here.
2025.05.28: Transition to HTTPS protocol RutOS 7.15
With the release of RutOS version 7.15 in Q2 2025, RUT241 devices will disable the HTTP protocol and enable HTTPS Redirect by default to enhance WebUI and API communication security.
With the release of RutOS version 7.15 firmware, the device's WebUI and API default communication methods will change. The HTTP protocol will be changed to HTTPS (only) in default configuration for security reasons and complying with security standards. The "HTTPS Redirect" functionality will be enabled by default so all HTTP requests will be automatically redirected through the HTTPS channel.
Change reasons
To enhance security measures and comply with security standards by eliminating unsecured HTTP protocol usage.
Affected products information
Model
Affected order codes
Order code changes
RUT241
All
No changes
Upcoming change date
Q2 2025
Change impact
Risk assessment
Users may receive a browser warning indicating that the connection is not secure due to the use of a self-signed certificate in HTTPS.
API users may experience issues depending on the tools they use to communicate with the API, as some may not support HTTPS, self-signed certificates or the tooling may have to be reconfigured to adapt to these changes.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. URL1URL2 For more detailed information, please contact your sales representative.
API users should update their tools and scripts to support HTTPS communication and handle self-signed certificates.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the PDF version of this notification, click here.
2025.03.25: New Hardware Revision
All RUT241 devices manufactured starting from Q2 2025 will require firmware version RUT2M_R_00.07.10.4 or newer to function properly.
All RUT241 devices manufactured starting from Q2 2025 will feature a new hardware revision. Devices with the updated hardware will require firmware version RUT2M_R_00.07.10.4 or newer to ensure proper functionality and compatibility. Previous firmware versions are not compatible with the new hardware revision. Disclaimer: Input/Output will not function on new hardware if firmware older than RUT2M_R_00.07.10.4 is used.
Hardware changes:
Added option to manufacture with eSIM module
Changes related to Input/Output control
Change reasons
New hardware revision
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2025 Q2
Change impact
Risk assessment
All risks are firmware-related. It is strongly advised to test firmware release RUT2M_R_00.07.10.4 or newer on the updated RUT241 hardware revision devices.
Please note: This product change notification does not affect previously manufactured RUT241 devices.
Suggested implementation plan
Firmware downloads for the device can be found here.
For further information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification – Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2025.02.25: Mobile and I/O POST/GET Service Removal with RutOS 7.14
With the release of RutOS version 7.14, support for the RUT241 POST/GET service will be discontinued to enhance security while maintaining device functionality through alternative methods.
With the introduction of RutOS 7.14, the Mobile POST/GET and I/O POST/GET services will be removed from the firmware and will no longer be available in the package manager. These legacy services had security concerns, and their removal ensures a more robust security framework for the device. However, users will still be able to achieve the same functionalities using the device's API, which provides a more secure and efficient way to interact with the system.
Change reasons
Enhanced Security: Removing these services mitigates potential security risks and improves overall system integrity.
Improved API Support: Users can leverage the API for secure and flexible data handling without relying on deprecated methods.
The change aligns with modern security protocols and best practices in remote device management.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2025 Q2, with the release of RutOS 7.14
Change impact
Risk assessment
Clients using Mobile POST/GET and I/O POST/GET services will need to transition to API-based methods.
Some automation processes relying on these legacy services may require reconfiguration
API documentation and support resources will be available to facilitate a smooth transition.
Suggested implementation plan
Test API-based interactions before the transition to ensure compatibility.
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2025.02.24: Implementation of Read-Only System Files in RutOS 7.14
With the release of RutOS version 7.14 in Q2 2025, in RUT241 devices will implement read-only permissions for critical system files by default. The new read-only configuration ensures a more secure and stable environment, though it may affect those who perform non-standard operations.
With the release of RutOS version 7.14, the device’s critical system files will become read-only by default. This prevents unauthorized or accidental modifications that could damage the system’s integrity. Standard users operating within typical parameters should not be affected, while those who rely on direct file alterations will need to adjust their workflows. Custom firmware options are expected to allow reverting to a more flexible configuration if required.
Change reasons
To maintain system integrity, enhance reliability, and prevent unintended damage to core files.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
Q2 2025
Change impact
Risk assessment
Customers performing direct system-level modifications may need to adjust their procedures.
Standard end-users, who do not rely on altering critical system files, are unlikely to be affected.
Custom firmware solutions can restore file-level flexibility if required.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Review current workflows and identify any reliance on direct system file modifications. Consider using custom firmware builds if continued system-level customization is necessary.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the PDF version of this notification, click here.
2025.02.20: WebUI Mode Update with RutOS 7.13
With the release of RutOS version 7.13, RUT241 the WebUI will undergo changes to enhance user experience and accessibility.
PCN Number: PCN_RUTOS_CHANGE_RUT241_2025_02_20_EN
Change description
Change type
Firmware change
Detailed description
Previously, the WebUI provided two separate modes: Basic Mode and Advanced Mode. With the introduction of RutOS 7.13, these two modes will be merged into a unified interface, where users will have access to all settings within one mode.
Change reasons
Improved Usability: A single mode simplifies navigation and enhances user-friendliness.
Increased Accessibility: All essential settings remain available without needing to switch between modes.
Optimized User Experience: A streamlined design enhances efficiency and ease of use.
User-Driven Enhancement: This change is based on user feedback, aiming to create a more intuitive and accessible WebUI experience.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2025 Q2, with the release of RutOS 7.13
Change impact
Risk assessment
Users accustomed to switching between Basic and Advanced Mode may require time to adapt to the unified interface.
Settings will now be presented in a single, continuous view rather than separated into different modes.
Minor learning curve for users transitioning from previous WebUI versions.
Suggested implementation plan
Review the unified WebUI mode and familiarize yourself with having all settings available.
Refer to the updated user documentation and support resources for guidance.
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2025.01.22: Accessory mobile SMA replacement
Starting from 2025 Q1, for specific order codes the product accessory mobile SMA antenna in the standard package will be replaced.
Starting from 2025 Q1, for specific order codes (listed below), the product accessory mobile SMA antenna in the standard package is replaced with a mobile SMA antenna from a different manufacturer.
Specification Comparison
Parameter
Previous
Current
Frequency range
698 ~ 960, 1710 ~ 2690 MHz
600 ~ 2700 MHz
Polarization
Linear (vertical)
Linear
Gain
4.0 dBi
≤ 2.9 dBi
VSWR
3.0
≤ 4.7
Impedance
50 Ω
50 Ω
Connector type
SMA Male
SMA Male
Operating temperature
–40 °C ~ +85 °C
-20 °C to +70 °C
RoHS compliant
✓
✓
Weight
20 g
19.5 g
Change reasons
Reducing product lead times
Affected products information
Affected Order Codes
RUT2410340H0
RUT241087000
TRB245400800
TRB14040C400
TRB14140A300
TRB14240A700
TRB143400300
TRB143400400
TRB14540A300
RUT951900A00
RUT956900C00
RUT956900D00
Upcoming change date
2025 Q1
Change impact
Risk assessment
No risk factors encountered with this change.
Suggested implementation plan
No implementation plan needed.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2024.12.19: Tamper evident sticker
Beginning in January 2025, RUT241 devices will packaged in a box with a tamper evident sticker.
RUT241 devices will be packaged with tamper evident sticker on the box.
Please note that this change will be implemented gradually, throughout a 3-month transitional period starting in January 2025. During this period, your shipments of RUT241 may consist of either the current packaging or the new one described above.
Seal on:
Seal removed:
Change reasons
To enhance security and ensure reliability by confirming packaging integrity.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ****** (For North America region order codes)
N/A
Upcoming change date
2025 January
Change impact
Risk assessment
The sticker may leave residue on the box, affecting the packaging's appearance.
Marketing material such as photos might need replacing.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2024.09.18: EAN Code Change
Starting from October 1st 2024, new order codes created will have their own unique EAN codes.
The product identification system is being updated by assigning unique EAN codes to each new order code created from October 1st.
Change reasons
Improving product traceability, inventory management, and logistics accuracy across ordering and distribution systems.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 *****
No changes
Upcoming change date
October 1st, 2024
Change impact
Risk assessment
Every order code, created after this change, will have its own unique EAN code. Therefore, it might cause the need to review inventory management and ordering processes.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2024.05.15: SMA Connector Update
Starting from August 2024, RUT241 devices will be manufactured with updated SMA connectors.
PCN Number: PCN_RUT241_SMA_2024.05.15
Change description
Change type
Hardware change
Detailed description
Starting in August 2024, RUT241 devices will be manufactured with updated RP-SMA and SMA connectors. This update will not affect the functionality of the SMA connectors; it is only a change in their form. In the photos displayed below, you can see the change.
Please note that this change will be implemented gradually, throughout a 3-month transitional period starting in August 2024. During this period, your shipments of RUT241 may consist of either the current design or the new one described above.
Current design:
Updated design:
Change reasons
This will improve the effectiveness of device manufacturing.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 *****
No changes
Upcoming change date
August 2024
Change impact
Risk assessment
No risk factors are asociated with this change.
Please note: this product change notification does not affect any previous RUT241 devices, except new RUT241 devices that will be manufactured with this change.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
With the release of RutOS version 7.07, RUT241 device will experience changes related to the security improvements of the device.
PCN Number: PCN_RUTOS_CHANGE_2024_03_08_EN
Change description
Change type
Firmware change
Detailed description
Previously, during device resets, logs, RMS connection state data, and SIM PIN settings remained unchanged. However, starting with RutOS firmware version 7.07, all devices will uniformly reset logs, RMS connection state data, and SIM PIN settings to factory defaults when using the reset button. Other reset methods, including WebUI, SMS, and others, will remain unimpacted by this change.
Change reasons
Increasing security
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2024 Q2, with the release of RutOS 7.07
Change impact
Risk assessment
The loss of device logs upon utilizing the reset button may disrupt operational records and slow down subsequent troubleshooting efforts.
Failure to set up the SIM PIN post-reset via the reset button may result in SIM card lockout due to repeated incorrect PIN entries, causing service disruption and requiring either SIM replacement or PIN reset.
The device is still visible in RMS post-reset but cannot be accessed. Therefore, re-adding the device to RMS is necessary for continued access.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2023.08.02: Product packaging changes
Starting from 2023 Q3 RUT241 product packaging will be changed.
Change description
Change type
Packaging
Detailed description
The packaging for the product will undergo several updates including an update to the side print of the box. Additionally, the box will now feature press with certificates that will be printed according to the region. Finally, there will also be changes made to the company information section including the address, telephone number, email and website link.
Current design:
Updated packaging design:
Packaging dimensions will not change.
Change reasons
Design improvement.
Affected products information
Model
Affected order codes
Order code changes
RUT241
Only specific RUT241 client codes
No changes
Upcoming change date
2023 Q3
Change impact
Risk assessment
The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. Only specific client codes are affected by these changes. For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2023.06.07: QSG flyer replacement
Starting in Q3 of 2023, RUT241 routers will come with a new QSG flyer in the packaging.
Change description
Change type
Replacement of QSG flyer
Detailed description
RUT241 devices manufactured starting from Q3 2023 will have a new QSG flyer in the packaging. The new QSG flyer includes multiple languages, English, German, Spanish, French, Italian, the short version of QSG with a QR code/link to the full Web QSG version: teltonika-networks.com/QSG_RUT241
Previous design:
New design:
The new flyer will include QR codes with URL links to RMS and the Web version of the QSG (Quick Start Guide) for the RUT241.
Change reasons
Introducing additional languages.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2023, Q3
Change impact
Risk assessment
Marketing material such as photos might need replacing.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2023.02.13: MAC address range change
All Teltonika Networks devices manufactured starting from 2023, week 9 will have additional new MAC address range.
Change description
Change type
MAC address range
Detailed description
All Teltonika Networks devices manufactured starting from 2023, week 9 may have a MAC address from the new MAC address range 20:97:27:00:00:00 - 20:97:27:FF:FF:FF, as well as the current MAC address range 00:1E:42:00:00:00 - 00:1E:42:FF:FF:FF
Change reasons
Endpoint of the previous MAC address range.
Affected products information
Model
Affected order codes
Order code changes
All Teltonika Networks devices
All order codes
No changes
Upcoming change date
2023, week 9
Change impact
Risk assessment
Device install procedures or any automated solutions might need modifications.
Suggested implementation plan
For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2022.08.18: Default password change
All RUT241 devices manufactured starting from 2022, week 35, will have unique default password.
Change description
Change type
Default password change
Detailed description
RUT241 devices manufactured starting from Q3 2022 will have unique default password.
Change reasons
Increasing device security
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2022, week 35
Change impact
Risk assessment
Device install procedures or any automated solutions might need modifications. Please note: this product change notification does not affect any previous RUT241 devices.
Suggested implementation plan
For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2022.08.18: QSG flyer replacement
Starting from 2022, week 35, RUT241 routers will come with a new QSG flyer in the packaging.
Change description
Change type
Replacement of QSG flyer
Detailed description
RUT241 devices manufactured starting from Q3 2022 will have a new QSG flyer in the packaging. The new QSG flyer includes the short version of QSG with a QR code/link to the full Web QSG version: teltonika-networks.com/QSG_RUT241
Previous design:
New design:
The new flyer will include QR codes with URL links to RMS and the Web version of the QSG (Quick Start Guide) for the RUT241.
Change reasons
Reducing environmental impact.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2022, week 35
Change impact
Risk assessment
Marketing material such as photos might need replacing.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2022.08.18: Changes in engraving/labeling
Starting from 2022, week 35, RUT241 routers will be produced with modified bottom engraving/labeling.
Change description
Change type
External/visual
Detailed description
The device's unique default password will be added to the bottom engraving/labeling. The formatting for the remaining information on the labeling/engraving will be adjusted, and the Fira font will be used instead of Arial. The device's unique default password information will also be added to the QR code Information displayed after scanning QR code with syntax: WIFI:T:WPA;S:{{WIFISSID}};P:{{PASSWORD}};SN:{{SERIAL}};I:{{IMEI}};M:{{MAC}};U:admin;PW:{{DEVICEPASSWORD}};B:{{BATCH}};
From the device top engraving/labeling, the previously relevant authentication information text will be removed: User/Pass: admin/admin01.
The labeling on the product packaging will stay unchanged.
Old top engraving/labeling:
Old bottom engraving/labeling:
New top engraving/labeling:
New bottom engraving/labeling:
Change reasons
To accommodate the change from the standard default password to a unique default password for each device.
Affected products information
Model
Affected order codes
Order code changes
RUT241
RUT241 ******
No changes
Upcoming change date
2022, week 35
Change impact
Risk assessment
Changes to top labeling/engraving. Device's unique default password will be present on the product itself. This might impact marketing materials due to changing contents of the bottom informational engraving/labeling.
Suggested implementation plan
No implementation plan needed
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
