From Teltonika Networks Wiki
Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Status section > RUT850 Events Log
Summary
The Events Log windows display records of such event as logins, reboots, resets, connections, configuration changes and more.
Events Reporting
The Events Reporting section gives you the ability to configure rules that will inform you via SMS or email when certain events occur on your router. These events can be almost anything – configuration changes, reboots, new connections, various status updates, etc.
Events Reporting Configuration
Events Reporting Configuration is used to create and customize Events Reporting Rules. Here you can specify any event type and subtype, chose whether you want to be informed by an SMS message or email, modify what kind of information you want receive should an event occur. To open this window, choose an Event type, Event subtype and Action and click the Add button. A new rule should appear in the Events Reporting Rules tab. Click the Edit button located next to that rule after which you will be redirected to that rule's configuration window.
Send SMS
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Enable
|
yes | no; Default: no
|
Toggles the rule ON or OFF
|
| Event type
|
Config change | New DHCP client | FW upgrade | Mobile data | SMS | SIM switch | Signal Strength | Reboot | SSH | WebUI | New WiFi client | LAN port state | Backup | Restore point | GPS;
Default: Config change
|
The type of event that you wish to receive information about
|
| Event subtype
|
Sample: After unexpected shut down
|
Specified event's sub-type. This field changes in accordance with Event type
|
| Action
|
Send SMS | Send email; Default: Send SMS
|
Action that is to be taken after the specified event occurs
|
| Enable delivery retry
|
yes | no; Default: no
|
Toggles delivery retry On or OFF. If for some reason the message delivery is unsuccessful, the router initiates a retry if this field is enabled
|
| Retry interval
|
1 min. | 5 min. | 10 min. | 15 min. | 30 min. | 60 min.; Default 5 min.
|
Specifies when the router should try re-sending the message in case the first attempt was a failure
|
| Retry count
|
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10; Default: 2
|
Specifies the maximum number of failed attempts after which the router does not try to send the message anymore
|
| Message text on Event
|
string; Default: Router name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts;
|
Specifies the text that the message will contain
|
| Get status after reboot
|
yes | no; Default: no
|
Specifies whether the router should send an SMS message indicating the router's status after the reboot in addition to the original message
|
| Status message after reboot
|
string; Default: Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal strength - %ss; New FW available - %fs;
|
Specifies the text that the status message will contain. This field becomes visible only if Get status after reboot is checked
|
| Recipients
|
Single number | User group; Default: Single number
|
Specifies the intended recipients. A guide on how to create a User group can be found in the SMS Utilities chapter, User Groups section
|
| Recipient's phone number
|
phone number; Default: " "
|
The intended recipient's phone number. To add more than one number, click the green  plus symbol located to the right of this field. The phone number must be entered in the international format, but without dash symbols or spaces, e.g., +37061234567
|
Send Email
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Enable
|
yes | no; Default: no
|
Toggles the rule ON or OFF
|
| Event type
|
Config change | New DHCP client | FW upgrade | Mobile data | SMS | SIM switch | Signal Strength | Reboot | SSH | WebUI | New WiFi client | LAN port state | Backup | Restore point | GPS;
Default: Config change
|
The type of event that you wish to receive information about
|
| Event subtype
|
Sample: After unexpected shut down
|
Specified event's sub-type. This field changes in accordance with Event type
|
| Action
|
Send SMS | Send email; Default: Send SMS
|
Action that is to be taken after the specified event occurs
|
| Enable delivery retry
|
yes | no; Default: no
|
Toggles delivery retry On or OFF. If for some reason the message delivery is unsuccessful, the router initiates a retry if this field is enabled
|
| Retry interval
|
1 min. | 5 min. | 10 min. | 15 min. | 30 min. | 60 min.; Default 5 min.
|
Specifies when the router should try re-sending the message in case the first attempt was a failure
|
| Retry count
|
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10; Default: 2
|
Specifies the maximum number of failed attempts after which the router does not try to send the message anymore
|
| Subject
|
string; Default: " "
|
Specifies the subject of the email message
|
| Message text on Event
|
string; Default: Router name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts;
|
Specifies the text that the message will contain
|
| Get status after reboot
|
yes | no; Default: no
|
Specifies whether the router should send an SMS message indicating the router's status after the reboot in addition to the original message. If this is checked you will be prompted to enter the text that the status message should contain
|
| SMTP server
|
ip | host; Default: " "
|
Sender's email service provider's SMTP server. If you don't know the SMTP server's address, you can easily look it up online since it is public information
|
| SMTP port
|
integer [0..65535]; Default: " "
|
Sender's email service provider's SMTP port. If you don't know the SMTP server's port, you can easily look it up online since it is public information
|
| Secure connection
|
yes | no; Default: no
|
Toggles secure connection feature ON or OFF (use only if the email service provider's server supports SSL or TLS)
|
| Username
|
string; Default: " "
|
Sender's email account's login user name
|
| Password
|
string; Default: " "
|
Sender's email account's login password
|
| Sender's email address
|
email; Default: " "
|
The email address of the sender, i.e., the report message will be sent from this email. Make sure this is the same email that you provided login information to
|
| Recipient's email address
|
email; Default: " "
|
The intended recipient's email address. To add more than one email address, click the green plus symbol located to the right of this field
|
| Send test mail
|
-
|
Sends a test mail using the information that you provided. Once you click this button, the router will login to the provided email account and send the specified message to the specified address(-es). You should always send a test mail before finishing the configuration to make sure that everything is in order
|
Event Types and Sub-types
The examples provided above are both concerning the Reboot Event type and After unexpected shut down sub-type. This section is an overview of all other Event type and sub-types.
Config change
| ENEBT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when any type of configuration changes are applied
|
| SMS
|
Sends a report message when any SMS related configuration changes are applied. For example, whenever a new SMS Utilities rule is created or changed, changes are made to Auto Reply or Remote configurations, etc.
|
| Mobile traffic
|
Sends a report message when Mobile Traffic Logging is enabled/disabled or logging interval is changed.
|
| Multiwan
|
Sends a report message when changes to WAN Backup configuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor configurations are changed, etc.
|
| Mobile
|
Sends a report message when any Mobile configuration changes are applied. For example, whenever Service mode, APN, Connection type is changed, etc.
|
| Data limit
|
Sends a report message when any Mobile Data Limit configuration changes are applied. For example, whenever new data limit is configured, data limit gets disabled/enabled on SIM1/SIM2, data limit period is changed, etc.
|
| GPS
|
Sends a report message when any configuration changes concerning GPS are applied. For example, whenever GPS gets enabled/disabled, Remote host/IP address is changed, new Geofencing area is defined, etc.
|
| Events reporting
|
Sends a report message when any configuration changes to Events Reporting are applied. For example, whenever a new Events Reporting Rule is created, changed, deleted, etc.
|
| Periodic reboot
|
Sends a report message when any configuration changes to Periodic Reboot are applied. For example, whenever Periodic Reboot gets enabled/disabled, Periodic Reboot interval is changed, etc.
|
| Ping reboot
|
Sends a report message when any configuration changes to Ping Reboot are applied. For example, whenever Ping Reboot gets enabled/disabled, host to ping has changed, etc.
|
| Auto update
|
Sends a report message when any configuration changes to Auto update are applied
|
| Hotspot
|
Sends a report message when any configuration changes to Hotspot are applied. For example, whenever Hotspot SSID was changed, Radius server was changed, Hotspot was enabled/disabled, etc.
|
| Login page
|
Sends a report message when any login page are changed
|
| Language
|
Sends a report message when any language settings are changed
|
| DDNS
|
Sends a report message when any configuration changes to Dynamic DNS are applied. For example, whenever a new DDNS instance is created, changed, deleted or edited
|
| Access control
|
Sends a report message when any configuration changes to Access Control are applied. For example, SSH/HTTP/HTTPS remote or local access is enabled/disabled, changes are made to SSH or WebUI Access Secure, etc.
|
| DHCP
|
Sends a report message when any configuration changes to DHCP are applied. For example, whenever DHCP Server is enabled/disabled, DHCP address range is changed
|
| SSH
|
Sends a report message when any configuration changes to SSH are applied
|
| Network
|
Sends a report message when any Network related configuration changes are applied. For example, whenever Main WAN is changed, LAN IP address is changed, a Wi-Fi Access Point is enabled/disabled, etc.
|
| Wireless
|
Sends a report message when any configuration changes to Wireless are applied. For example, a new Wi-Fi Access point is created, deleted, enabled/disabled, SSID is changed, etc.
|
| Firewall
|
Sends a report message when any configuration changes to Firewall are applied. For example, a new Traffic rule is added, a new SNAT rule is added, a rule is disabled/enabled, etc.
|
| NTP
|
Sends a report message when any configuration changes to NTP are applied. For example, whenever NTP is enabled/disabled, Time zone is changed, etc.
|
| Other
|
Sends a report message when any configuration changes other than the ones provided above are applied
|
New DHCP client
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when a new devices is connected to the router either via LAN or Wi-Fi
|
| Connected from WiFi
|
Sends a report message when a new device is connected to the router via Wi-Fi
|
| Connected from LAN
|
Sends a report message when a new device is connected to the router via LAN port
|
FW Upgrade
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when the router initiates a Firmware upgrade (either from an uploaded FW file or from server)
|
| From file
|
Sends a report message when the router initiates a Firmware upgrade from an uploaded FW file
|
| From server
|
Sends a report message when the router initiates a Firmware upgrade from server
|
Mobile Data
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when mobile data connection status changes (from Connected to Disconnected or vice versa)
|
| Connected
|
Sends a report message when mobile data connection is achieved
|
| Disconnected
|
Sends a report message when mobile data connection is lost
|
SMS
| EVENT SUB-TYPE
|
DESCRIPTION
|
| SMS received
|
Sends a report message when the router receives a new SMS message
|
Signal Strength
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when the router's RSSI value leaves any one of the below specified ranges
|
| -121 dBm -113 dBm
|
Sends a report message when the router's RSSI value leaves the -121 dBm to -113 dBm range
|
| -113 dBm -98 dBm
|
Sends a report message when the router's RSSI value leaves the -113 dBm to -98 dBm range
|
| -98 dBm -93 dBm
|
Sends a report message when the router's RSSI value leaves the -98 dBm to -93 dBm range
|
| -93 dBm -75 dBm
|
Sends a report message when the router's RSSI value leaves the -93 dBm to -75 dBm range
|
| -75 dBm -60 dBm
|
Sends a report message when the router's RSSI value leaves the -75 dBm to -60 dBm range
|
| -60 dBm -50 dBm
|
Sends a report message when the router's RSSI value leaves the -60 dBm to -50 dBm range
|
Reboot
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when the router starts up after any type of reboot (except factory reset)
|
| After unexpected shutdown
|
Sends a report message when the router shuts down unexpectedly and starts back up again
|
| From WebUI
|
Sends a report message when the router starts up after a reboot command is initiated from the router's WebUI Administration->Reboot section
|
| From SMS
|
Sends a report message when the router starts up after a reboot command is initiated via SMS
|
| From Input/Output
|
Sends a report message when the router starts up after a reboot command is initiated via Input/Output
|
| From ping reboot
|
Sends a report message when the router starts up after a reboot command is initiated by the Ping Reboot function
|
| From periodic reboot
|
Sends a report message when the router starts up after a reboot command is initiated by the Periodic Reboot function
|
| From button
|
Sends a report message when the router starts up after being restarted by the press of the physical button located on the router
|
SSH
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when someone connects to the router via SSH (either successfully or unsuccessfully)
|
| Successful authentication
|
Sends a report message when someone successfully connects to the router via SSH
|
| Unsuccessful authentication
|
Sends a report message when someone unsuccessfully tries to connect to the router via SSH
|
WebUI
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when someone connects to the router via HTTP or HTTPS (either successfully or unsuccessfully)
|
| Successful authentication
|
Sends a report message when someone successfully connects to the router via HTTP or HTTPS
|
| Unsuccessful authentication
|
Sends a report message when someone unsuccessfully tries to connect to the router via HTTP or HTTPS
|
New WiFi client
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when a device connects to or disconnects from the router's WLAN (Wireless Network or Wireless LAN)
|
| Connected
|
Sends a report message when a device connects to the router's WLAN
|
| Disconnected
|
Sends a report message when a device disconnects from the router's WLAN
|
Backup
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when the router switches from using the Main WAN to using the Backup WAN and vice versa
|
| Switched to main
|
Sends a report message when the router switches from using the Main WAN to using the Backup WAN
|
| Switched to backup
|
Sends a report message when the router stops using the Backup WAN and start using the Main WAN
|
Restore Point
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when either when a new Restore point is created or a Restore Point is loaded in to the router
|
| Save
|
Sends a report message when a new Restore Point is created
|
| Load
|
Sends a report message when a Restore Point is loaded on to the router
|
GPS
| EVENT SUB-TYPE
|
DESCRIPTION
|
| All
|
Sends a report message when the router moves in and out of the GPS Geofence area
|
| Left geofence
|
Sends a report message when the router leaves the GPS Geofence area
|
| Entered geofence
|
Sends a report message when the router enter the GPS Geofence area
|
Reporting Configuration
The Reporting Configuration section lets you create rules that transfer logs to email or FTP.
Events Log Report Configuration
Events Log Report Configuration provides you with the ability to change the configuration of periodic events reporting to email or FTP. You can access it by creating a rule and clicking the Edit button next to it, just like Event Reporting Configuration.
FTP
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Enable
|
yes | no; Default: no
|
Toggles the log file report rule ON or OFF
|
| Events log
|
System | Network | All; Default: System
|
Specifies which log to transfer
|
| Transfer type
|
Email | FTP; Default: Email
|
Specifies whether to transfer the log(s) to FTP or Email
|
| Compress file
|
yes | no; Default: no
|
Compress events log file using gzip
|
| Enable delivery retry
|
yes | no; Default: no
|
Toggles delivery retry On or OFF. If for some reason the message delivery is unsuccessful, the router initiates a retry if this field is enabled
|
| Host
|
host | ip; Default " "
|
FTP server's IP address or hostname
|
| Retry count
|
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10; Default: 2
|
Specifies the maximum number of failed attempts after which the router does not try to send the message anymore
|
| User name
|
string; Default: " "
|
Login user name used for authentication to the FTP server
|
| Password
|
string; Default: " "
|
Login password used for authentication to the FTP
|
| Interval between reports
|
Week | Month | Year; Default: Week
|
Specifies how often the reports should be sent
|
| Weekday | Month day
|
weekday | month day; Default: Sunday
|
Specifies the day of the month/week when the logging should take place. This field changes in accordance with Interval between reports
|
| Hour
|
integer [1..24]; Default: 1
|
Specifies on the hour of the day when the logging should take place
|
Email
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Enable
|
yes | no; Default: no
|
Toggles the log file report rule ON or OFF
|
| Events log
|
System | Network | All; Default: System
|
Specifies which log to transfer
|
| Transfer type
|
Email | FTP; Default: Email
|
Specifies whether to transfer the log(s) to FTP or Email
|
| Compress file
|
yes | no; Default: no
|
Compress events log file using gzip
|
| Subject
|
string; Default: " "
|
Specifies the subject of the email log message
|
| Message
|
string; Default: " "
|
The text contained in the log email. This has nothing to do with the log itself, which will be sent as an attached file
|
| SMTP server
|
ip | host; Default: " "
|
Sender's email service provider's SMTP server. If you don't know the SMTP server's address, you can easily look it up online since it is public information
|
| SMTP server port
|
integer [0..65535]; Default: " "
|
Sender's email service provider's SMTP server. If you don't know the SMTP server's address, you can easily look it up online since it is public information
|
| Secure connection
|
yes | no; Default: no
|
Toggles secure connection feature ON or OFF (use only if the email service provider's server supports SSL or TLS)
|
| Username
|
string; Default: " "
|
Sender's email account's login user name
|
| Password
|
string; Default: " "
|
Sender's email account's login password
|
| Sender's email address
|
email; Default: " "
|
The email address of the sender, i.e., the report message will be sent from this email. Make sure this is the same email that you provided login information to
|
| Recipient's email address
|
email; Default: " "
|
The intended recipient's email address. To add more than one email address, click the green plus symbol located to the right of this field
|
| Interval between reports
|
Week | Month | Year; Default: Week
|
Specifies how often the reports should be sent
|
| Weekday | Month day
|
weekday | month day; Default: Sunday
|
Specifies the day of the month/week when the logging should take place. This field changes in accordance with Interval between reports
|
| Hour
|
integer [1..24]; Default: 1
|
Specifies on the hour of the day when the logging should take place
|
plus symbol located to the right of this field. The phone number must be entered in the international format, but without dash symbols or spaces, e.g., +37061234567
