RUTX11 Overview

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 Status section > RUTX11 Overview

The information in this page is updated in accordance with firmware version RUTX_R_00.07.06.6.


Summary

The Overview page contains various information summaries and shortcuts to other pages. It is also the homepage of the WebUI. This chapter is an overview of the Overview page for RUTX11 router. If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

Overview

The Overview page contains widgets that display the status of various systems related to the device. The figure below is an example of the Overview page:

Networking rutos manual overview 1 2 v3.png

Mobile widget


The Mobile widget displays information related to the mobile connection and the current signal strength (Networking rutx trb14x status overview widget mobile signal strength indicator v1.png). Each filled-up bar represents a different RSSI value:

bars signal strength value / RSSI (in dBm)
0 ≤ -111
1 -110 to -97
2 -96 to -82
3 -81 to -67
4 -66 to -52
5 ≥ -51

The same calculation principle applies to the Signal strength LEDs located on your device. You can find more information on signal strength values and different measurements here.

Widget button: Info


The Info (Trb14x webui status overview widget button info icon v2.png) button is located next to the name of some widgets. Clicking the Info button redirects the user to a status page related to the widget's displayed information. For example, clicking the Info button on the System widget would redirect the user to the Status → System page:

Networking rutx11 manual overview widget button info action v1.png

Widget button: Settings


The Settings button is located next to the name of some widgets. Clicking the Settings button redirects the user to a configuration page related to the widget's displayed information. For example, clicking the Info button on the Mobile widget would redirect the user to the Network → LAN Configuration page:

Networking rutos manual overview widget button settings v1.png

Adding more widgets


There is a default set of widgets displayed in the Overview page, but more can be added by clicking Overview Settings button.

Networking rutos manual overview settings button.png

From here you can add non-default widgets.

Networking rutos manual overview settings 1 2 1.png