Changes

To add a device to Teltonika's Remote Management System (RMS) '''remote monitoring for RMS''' must be enabled from the router's side. In order to do so, folow these steps:

Before you can add a new device to Teltonika's Remote Management System (RMS), you must enable '''remote monitoring for RMS''' in the router's configuration. You can do this either before or after adding the device from the RMS web page. A brief guide on how to do this is presented below:

* Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key:

* Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key: