685
edits
Changes
RMS Device configuration (view source)
Revision as of 18:26, 17 January 2023
, 18:26, 17 January 2023no edit summary
=Device configuration=
=Device configuration=
==Summary==
==Summary==
Devices you're trying to configure must be '''Online''' (<span style="color:#6CAF8F">⬤</span>), otherwise, the '''Device configuration''' option will be grayed out.
Devices you're trying to configure must be '''Online''' (<span style="color:#6CAF8F">⬤</span>), otherwise, the '''Device configuration''' option will be grayed out.
<big>'''<span style="color:#ff0000">Disclaimer</span>'''</big>:
*This tool is only available to use on devices with Firmware [[FW & SDK Downloads|'''07.03''']] and up.
*Also, devices you're going to configure must be on the same version of the firmware: e.g. RUTX_R_00.'''07.03.2''' and RUT9_R_00.'''07.03.2''' can be configured while RUTX_R_00.'''07.03''' RUTX_R_00.'''07.03.2''' can not be.
==Overview==
==Overview==
#This will parse all information on this specific endpoint and put in the lines below.
#This will parse all information on this specific endpoint and put in the lines below.
[[File:Rmsmulticonfig4.png|border|class=tlt-border|1100px]]
[[File:Rmsmulticonfig4.png|border|class=tlt-border|1100px]]
If you've selected more than one device, you will get to choose which device's configuration to parse:
[[File:Rmsmulticonfig8.png|border|class=tlt-border|300px]]
*Inbetween pressing the button and parsing all information you should get this message that the action was successful:
*Inbetween pressing the button and parsing all information you should get this message that the action was successful:
[[File:Rmsmulticonfig7.png|300px]]
[[File:Rmsmulticonfig7.png|300px]]
==Create==
Here, you'll have an option to create entirely new configuration of the desired endpoint.
Example: We are going to create a new access point on our Wi-Fi interface:
#Let's find '''Create''' section on our wireless devices.<br>[[File:Rmsmulticonfig10.png|border|class=tlt-border|900px]]
#Now we need to fill out all endpoint fields that we would like for our new AP to have.<br>[[File:Rmsmulticonfig9.png|border|class=tlt-border|900px]]
#Here we're creating new Wi-Fi AP on RUT240 and RUT955 and as their Wi-Fi functioniality is the same, pushing new configuration onto devices is successful.<br>[[File:Rmsmulticonfig11.png|border|class=tlt-border|500px]]
*<big>'''<span style="color:#ff0000">Note</span>'''</big>: if you're configuring some functionality that the selected device does not have, and save it onto device, you'll get this message instead:
[[File:Rmsmulticonfig12.png|border|class=tlt-border|500px]]
[[Category:RMS_Configuration_menu]]
[[Category:RMS_Configuration_menu]]
