Changes

==Introduction==

==Introduction==

<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>RUTXXX_R_00_07_02</b></span> firmware version.</span>

<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>RUTXXX_R_00.07.04</b></span> firmware version.</span>

'''JSON-RPC''' is a remote procedure call protocol encoded in JSON. It is a very simple protocol (and very similar to XML-RPC), defining only a few data types and commands. JSON-RPC allows for notifications (data sent to the server that does not require a response) and for multiple calls to be sent to the server which may be answered out of order.

'''JSON-RPC''' is a remote procedure call protocol encoded in JSON. It is a very simple protocol (and very similar to XML-RPC), defining only a few data types and commands. JSON-RPC allows for notifications (data sent to the server that does not require a response) and for multiple calls to be sent to the server which may be answered out of order.

'''{"jsonrpc":"2.0","id":1,"result":[0]}'''

'''{"jsonrpc":"2.0","id":1,"result":[0]}'''

====LUCI-RELOAD====

====RELOAD_CONFIG====

----

----

In order for the changes to take effect, use the '''luci-reload''' command which restarts all of the router's services. The luci-reload command looks like this:

In order for the changes to take effect, use the '''reload_config''' command which restarts all of the router's services. The reload_config command looks like this:

  curl -d "{\"jsonrpc\":\"2.0\",\"id\":1, \"method\":\"call\", \"params\":[\"428a9fa57f1a391db0bd1b865fa16bb5\", \"file\", \"exec\", {\"command\": \"<span style=color:orange>luci-reload</span>\"} ] }" http://<span style=color:black>192.168.56.1</span>/ubus

  curl -d "{\"jsonrpc\":\"2.0\",\"id\":1, \"method\":\"call\", \"params\":[\"428a9fa57f1a391db0bd1b865fa16bb5\", \"file\", \"exec\", {\"command\": \"<span style=color:orange>reload_config</span>\"} ] }" http://<span style=color:black>192.168.56.1</span>/ubus

The command itself is highlighted in orange.

The command itself is highlighted in orange.

The command above will '''enable''' the Ping Reboot function, set the host to ping to '''8.8.4.4''' and ping packet size to '''64'''. The default values are highlighted in orange and the new ones are highlighted in green.

The command above will '''enable''' the Ping Reboot function, set the host to ping to '''8.8.4.4''' and ping packet size to '''64'''. The default values are highlighted in orange and the new ones are highlighted in green.

'''Note: Remember always to use the commands in the order (set, commit, luci-reload)'''

'''Note: Remember always to use the commands in the order (set, commit, reload_config)'''

==Some Additional Commands==

==Some Additional Commands==

  {"jsonrpc":"2.0","id":1,"result":[<span style=color:blue>0</span>]}

  {"jsonrpc":"2.0","id":1,"result":[<span style=color:blue>0</span>]}

The command used is ''uci set'' (highlighted in red). The config file name is '''simcard''', section '''sim1''', options '''mtu''' and '''service''' (configs, sections and options highlighted in orange). The response shown above is a positive response, but don't forget to execute ''uci commit'' and ''luci-reload'' afterwards or else your changes will not take effect.

The command used is ''uci set'' (highlighted in red). The config file name is '''simcard''', section '''sim1''', options '''mtu''' and '''service''' (configs, sections and options highlighted in orange). The response shown above is a positive response, but don't forget to execute ''uci commit'' and ''reload_config'' afterwards or else your changes will not take effect.

[[Category: RutOS Configuration Examples]]

[[Category: RutOS Configuration Examples]]