Changes

==Some Additional Commands==

==Some Additional Commands==

If the commands found in the guide above did not suffice your needs, this section provides a list of additional ones. The commands presented in this section will be for both Linux and Windows operating systems. They should be used as syntax examples for your own purposes.

If the commands found in the guide above did not suffice your needs, this section provides a list of additional ones. The commands presented in this section will be for both Linux and Windows operating systems. They should be used as syntax examples for your own purposes.

===WiFi clients list===

===WiFi clients list===

----

----

'''The response''' should look something like this:

'''The response''' should look something like this:

  {"jsonrpc":"2.0","id":1,"result":[0,{"results":

  {"jsonrpc":"2.0","id":1,"result":[0,{"results":

  [{"mac":"<span style=color:green>E4:02:9B:88:09:AA</span>","signal":<span style=color:blue>-32</span>,"noise":<span style=color:blue>-88</span>,"inactive":<span style=color:blue>10</span>,"rx":

  [{"mac":"<span style=color:green>E4:02:9B:XX:XX:XX</span>","signal":<span style=color:blue>-32</span>,"noise":<span style=color:blue>-88</span>,"inactive":<span style=color:blue>10</span>,"rx":

  {"rate":<span style=color:blue>1000</span>,"mcs":<span style=color:blue>0</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>false</span>},"tx":

  {"rate":<span style=color:blue>1000</span>,"mcs":<span style=color:blue>0</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>false</span>},"tx":

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}},

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}},

  {"mac":"<span style=color:green>D8:C7:71:47:90:E1</span>","signal":<span style=color:blue>-12</span>,"noise":<span style=color:blue>-88</span>,"inactive":<span style=color:blue>400</span>,"rx":

  {"mac":"<span style=color:green>D8:C7:71:XX:XX:XX</span>","signal":<span style=color:blue>-12</span>,"noise":<span style=color:blue>-88</span>,"inactive":<span style=color:blue>400</span>,"rx":

  {"rate":<span style=color:blue>1000</span>,"mcs":<span style=color:blue>0</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>false</span>},"tx":

  {"rate":<span style=color:blue>1000</span>,"mcs":<span style=color:blue>0</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>false</span>},"tx":

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}}]}]}

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}}]}]}

To obtain these values, the Linux '''iwinfo''' command and '''assoclist''' parameter (red) are used. Highlighted in green are the devices connected to the router via WiFi as identified by their MAC addresses. The response information about the connection with the device, such as signal strength, noise, time of inactivity (idle time), rx, tx rate, etc., is highlighted in blue.  

To obtain these values, the Linux '''iwinfo''' command and '''assoclist''' parameter (red) are used. Highlighted in green are the devices connected to the router via WiFi as identified by their MAC addresses. The response information about the connection with the device, such as signal strength, noise, time of inactivity (idle time), rx, tx rate, etc., is highlighted in blue.  

===WiFi information===

===WiFi information===

----

----

  {"jsonrpc":"2.0","id":1,"result":[0,

  {"jsonrpc":"2.0","id":1,"result":[0,

  {"phy":"<span style=color:blue>phy0</span>","ssid":"<span style=color:blue>HAL9000</span>","bssid":"<span style=color:blue>00:1E:42:16:D6:68</span>","country":"<span style=color:blue>00</span>","mode":"<span style=color:blue>Master</span>","channel":<span style=color:blue>6</span>,"frequency":<span style=color:blue>2437</span>,"txpower":<span style=color:blue>20</span>,

  {"phy":"<span style=color:blue>phy0</span>","ssid":"<span style=color:blue>HAL9000</span>","bssid":"<span style=color:blue>00:1E:42:XX:XX:XX</span>","country":"<span style=color:blue>00</span>","mode":"<span style=color:blue>Master</span>","channel":<span style=color:blue>6</span>,"frequency":<span style=color:blue>2437</span>,"txpower":<span style=color:blue>20</span>,

  "quality":<span style=color:blue>22</span>,"quality_max":<span style=color:blue>70</span>,"signal":<span style=color:blue>22</span>,"noise":<span style=color:blue>-61</span>,"bitrate":<span style=color:blue>72200</span>,"encryption":

  "quality":<span style=color:blue>22</span>,"quality_max":<span style=color:blue>70</span>,"signal":<span style=color:blue>22</span>,"noise":<span style=color:blue>-61</span>,"bitrate":<span style=color:blue>72200</span>,"encryption":

  {"enabled":<span style=color:blue>false</span>},"hwmodes":["<span style=color:blue>b</span>","<span style=color:blue>g</span>","<span style=color:blue>n</span>"],"hardware":{"name":"<span style=color:blue>Generic MAC80211</span>"}}]}

  {"enabled":<span style=color:blue>false</span>},"hwmodes":["<span style=color:blue>b</span>","<span style=color:blue>g</span>","<span style=color:blue>n</span>"],"hardware":{"name":"<span style=color:blue>Generic MAC80211</span>"}}]}

As with the clients list command described above, to obtain this information the Linux '''iwinfo''' command is used, but this time with the '''info''' parameter (red). The relevant information, such as WiFi SSID, WiFi MAC address, WiFi channel, Encryption type, etc., is highlighted in blue

As with the clients list command described above, to obtain this information the Linux '''iwinfo''' command is used, but this time with the '''info''' parameter (red). The relevant information, such as WiFi SSID, WiFi MAC address, WiFi channel, Encryption type, etc., is highlighted in blue

===Manufacturing information===

===Manufacturing information===

----

----

         "805725a19ab0fba6c2b44ecf2f952fb9","file", "exec",

         "805725a19ab0fba6c2b44ecf2f952fb9","file", "exec",

         {

         {

             "command":"<span style=color:red>mnf_info</span>", "params":["<span style=color:red>name</span>", "<span style=color:red>sn</span>", "<span style=color:red>mac</span>"]

             "command":"<span style=color:red>mnf_info</span>", "params":["<span style=color:red>--name</span>", "<span style=color:red>--batch</span>"]

         }

         }

     ]

     ]

'''Linux:'''

'''Linux:'''

  curl -d "{ \"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"call\", \"params\": [ \"805725a19ab0fba6c2b44ecf2f952fb9\",\"file\", \"exec\",{ \"command\":\"<span style=color:red>mnf_info</span>\", \"params\":[\"<span style=color:red>name</span>\", \"<span style=color:red>sn</span>\", \"<span style=color:red>mac</span>\"] } ] }" http://<span style=color:black>192.168.1.1</span>/ubus

  curl -d "{ \"jsonrpc\": \"2.0\", \"id\": 1, \"method\": \"call\", \"params\": [ \"805725a19ab0fba6c2b44ecf2f952fb9\",\"file\", \"exec\",{ \"command\":\"<span style=color:red>mnf_info</span>\", \"params\":[\"<span style=color:red>--name</span>\", \"<span style=color:red>--batch</span>\"] } ] }" http://<span style=color:black>192.168.1.1</span>/ubus

'''Response:'''

'''Response:'''

  {"jsonrpc":"2.0","id":1,"result":[0,{"code":0,"stdout":"<span style=color:blue>RUT950HG12C0</span>\n<span style=color:blue>1367435694</span>\n<span style=color:blue>001e4216d666</span>\n"}]}

  {"jsonrpc":"2.0","id":1,"result":[0,{"code":0,"stdout":"<span style=color:blue>"RUT955003XXX</span>\n<span style=color:blue>0105</span>\n<span style=color:blue>001e4216d666</span>\n"}]}

To obtain the manufacturing information the '''mnf_info''' (highlighted in red) command is used. In this case a query was sent asking for the device's Product Code (name), Serial Number (sn) and MAC Address (mac) (highlighted in red in the query; returned values highlighted in blue). Using ''mnf_info'', you can "ask" the router for any type of manufacturing information. Here is the list of possible ''mnf_info'' parameters:

To obtain the manufacturing information the '''mnf_info''' (highlighted in red) command is used. In this case a query was sent asking for the device's Product Code (name), Serial Number (sn) and MAC Address (mac) (highlighted in red in the query; returned values highlighted in blue). Using ''mnf_info'', you can "ask" the router for any type of manufacturing information. Here is the list of possible ''mnf_info'' parameters:

* '''mac''' - returns the router's LAN MAC address

* '''--mac''' - returns the router's LAN MAC address

* '''maceth''' - returns the router's WAN MAC address

* '''--maceth''' - returns the router's WAN MAC address

* '''name''' - returns the router's Product Code

* '''--name''' - returns the router's Product Code

* '''wps''' - returns the router's WPS PIN number

* '''--wps''' - returns the router's WPS PIN number

* '''sn''' - returns the router's Serial number

* '''--sn''' - returns the router's Serial number

* '''batch''' - returns the router's Batch number

* '''--batch''' - returns the router's Batch number

* '''hwver''' - returns the router's Hardware Revision number

* '''--hwver''' - returns the router's Hardware Revision number

* '''simpin''' - returns the router's SIM card's PIN (as it is specified in the '''[[RUT955 Mobile|Mobile]]''' section)

* '''--simpin''' - returns the router's SIM card's PIN (as it is specified in the '''[[RUT955 Mobile|Mobile]]''' section)

* '''blver''' - returns the router's Bootloader version

* '''--blver''' - returns the router's Bootloader version

===GPS Data===

===GPS Data===

----

----

  {"jsonrpc":"2.0","id":1,"result":[0,{"code":0,"stdout":"<span style=color:blue>-23.612625\n-46.626355\</span>n"}]}

  {"jsonrpc":"2.0","id":1,"result":[0,{"code":0,"stdout":"<span style=color:blue>-23.612625\n-46.626355\</span>n"}]}

The blue part in the code are the Latitude and Longitude.

The blue part in the code are the Latitude and Longitude.

<br><br><br>

<br>

===Firmware number===

===Firmware number===

----

----

This command ('''file''', '''read''', highlighted in red) is an alternative to the Linux '''cat''' command. All you need is to specify the path (in this case '''/etc/version''', highlighted in red) to the file that you wish to read.

This command ('''file''', '''read''', highlighted in red) is an alternative to the Linux '''cat''' command. All you need is to specify the path (in this case '''/etc/version''', highlighted in red) to the file that you wish to read.

===Reboot===

===Reboot===

----

----

'''Response:'''

'''Response:'''

The success response for this command is an empty message. If the response contains no data, the command was executed successfully.  

The success response for this command is an empty message. If the response contains no data, the command was executed successfully.  

===Set SIM card information===

===Set SIM card information===

----

----