489
edits
Changes
L2 LAN bridging over internet using L2TPv2+EoIP (view source)
Revision as of 15:10, 27 April 2023
, 15:10, 27 April 2023→Testing the configuration
To confirm this on the Teltonika router's WebUI navigate to '''Network → Interfaces → General''' on the LAN interface you should see MikroTik IP(in this example 192.168.88.x):
To confirm this on the Teltonika router's WebUI navigate to '''Network → Interfaces → General''' on the LAN interface you should see MikroTik IP(in this example 192.168.88.x):
[[File:Networking rutxxx configuration examples DHCP LAN v1.png|border|class=tlt-border|1100px]]
[[File:Networking rutxxx configuration examples DHCP LAN v2.png|border|class=tlt-border|1100px]]
Additionally, we can check if we can reach MikroTik router through L2TP IP(10.0.0.1) or a device behind the MikroTik. Once again open your device's CLI/SSH and execute the command ping 10.0.0.1 you should be able to reach the MikroTik virtual IP:
Additionally, we can check if we can reach MikroTik router through L2TP IP(10.0.0.1) or a device behind the MikroTik. Once again open your device's CLI/SSH and execute the command ping 10.0.0.1 you should be able to reach the MikroTik virtual IP:
